User manual HOTPOINT FRDD 642 HA

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HOTPOINT FRDD 642 HA. We hope that this HOTPOINT FRDD 642 HA user guide will be useful to you.


HOTPOINT FRDD 642 HA : Download the complete user guide (5530 Ko)

Manual abstract: user guide HOTPOINT FRDD 642 HA

Detailed instructions for use are in the User's Guide.

[. . . ] FRDD 642 /HA(ICE) Français Mode d’emploi TABLE DE CUISSON Sommaire Mode d’emploi, 1 Avertissements, 3 Assistance, 5 Description de l’appareil, 6 Installation, 21 Mise en marche et utilisation, 25 Précautions et conseils, 25 Nettoyage et entretien, 26 Anomalies et remèdes, 26 Italiano Türkçe Istruzioni per l’uso PIANO Sommario Istruzioni per l’uso, 1 Avvertenze, 2 Assistenza, 5 Descrizione dell’apparecchio, 6 Installazione, 8 Avvio e utilizzo, 12 Precauzioni e consigli, 12 Manutenzione e cura, 13 Anomalie e rimedi, 13 Kullanım talimatları SETÜSTÜ İçindekiler Kullanım talimatları, 1 Uyarı, 3 Teknik Servis, 5 Cihazın tanıtımı, 6 Montaj, 28 Başlatma ve kullanım, 32 Önlemler ve tavsiyeler, 32 Servis ve bakım, 33 Arızalar ve çözümler, 33 English Operating Instructions HOB Contents Operating Instructions, 1 Warnings, 2 Assistance, 5 Description of the appliance, 6 Installation, 15 Start-up and use, 19 Precautions and tips, 19 Maintenance and care, 20 Troubleshooting, 20 ‫تعليمات التشغيل‬ ‫المحتويات‬ ‫رف تسخين‬ 1،‫تعليمات التشغيل‬ 4،‫تحذيرات‬ 5،‫المساعدة‬ 7،‫وصف الجهاز‬ 35 ،‫التركيب‬ 39،‫بدء التشغيل واالستخدام‬ 39 ،‫وسائل الحذر والنصائح‬ 38 ،‫استكشاف المشاكل وحلها‬ 38 ،‫الصيانة والعناية‬ Avvertenze ATTENZIONE: Questo apparecchio e le sue parti accessibili diventano molto caldi durante l’uso. Warnings WARNING: The appliance and its accessible parts become hot during use. Children less than 8 years of age shall be kept away unless continuously supervised. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. [. . . ] The installer must ensure that the correct electrical connection has been made and that it is compliant with safety regulations. Before connecting to the power supply, make sure that: • the appliance is earthed and the plug is compliant with the law. € the socket can withstand the maximum power of the appliance, which is indicated on the data plate. € the voltage is in the range between the values indicated on the data plate. If the socket is incompatible with the plug, ask an authorised technician to replace it. Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible. The cable must be checked regularly and replaced by authorised technicians only (see Assistance). The manufacturer declines any liability should these safety measures not be observed. Connection to the gas system must be carried out in such a way as not to place any strain of any kind on the appliance. There is an adjustable L-shaped pipe fitting on the appliance supply ramp and this is fitted with a seal in order to prevent leaks. The seal must always be replaced after rotating the pipe fitting (seal provided with appliance). These pipes must be installed so that they are never longer than 2000 mm when fully extended. Once connection has been carried out, make sure that the flexible metal pipe does not touch any moving parts and is not compressed. Only use pipes and seals that comply with current national regulations. When the installation process is complete, check the pipe fittings for leaks using a soapy solution. Adapting to different types of gas To adapt the hob to a different type of gas other than default type (indicated on the rating plate at the base of the hob or on the packaging), the burner nozzles should be replaced as follows: 1. Unscrew the nozzles using a 7 mm socket spanner, and replace them with nozzles for the new type of gas (see table 1 “Burner and nozzle characteristics”). Reassemble the parts following the above procedure in the reverse order. Once this procedure is finished, replace the old rating sticker with one indicating the new type of gas used. € Adjusting the burners’ primary air Does not require adjusting. If a flame is accidentally extinguished, turn off the control knob and wait for at least 1 minute before trying to relight it. To switch off the burner, turn the knob in a clockwise direction until it stops (when reaches the “●” position). [. . . ] To avoid damaging the electric ignition device, do not use it when the burners are not in their housing. Gas tap maintenance Over time, the taps may become jammed or difficult to turn. This procedure must be performed by a qualified technician authorised by the manufacturer. Maintenance and care Switching the appliance off Cleaning the hob surface Disconnect your appliance from the electricity supply before carrying out any work on it. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HOTPOINT FRDD 642 HA




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HOTPOINT FRDD 642 HA will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.