User manual HOTPOINT FMF 703B IT

[. . . ] Levelling the machine correctly will provide it with stability, help to avoid vibrations and excessive noise and prevent it from shifting while it is operating. If it is placed on carpet or a rug, adjust the feet in such a way as to allow a sufficient ventilation space underneath the washing machine. Connecting the electricity and water supplies Connecting the water inlet hose 1. Connect the inlet hose by screwing it to a cold water tap using a 3/4 gas threaded connection (see figure). [. . . ] Consumersshould contact their local authority or retailer for information concerning the correct disposal of their old appliance. 17 Description of the washing machine GB Control panel TEMPERATURE button CHILD LOCK button CLEANING ACTION button ON/OFF button DISPLAY Detergent dispenser drawer WASH CYCLE SELECTOR KNOB SPIN OPTION START/PAUSE button button and indicator light button and indicator light DELAY TIMER button Detergent dispenser drawer: used to dispense detergents and washing additives ( see “Detergents and laundry”). The START/PAUSE indicator light which flashes slowly in a green colour shows that the machine is switched on. To switch off the washing machine during the wash cycle, press and hold the button for approximately 3 seconds; if the button is pressed briefly or accidentally the machine will not switch off. If the machine is switched off during a wash cycle, this wash cycle will be cancelled. WASH CYCLE SELECTOR KNOB: used to set the desired wash cycle (see “Table of programmes and wash cycles”). oPTION button and indicator light: press to select the available options. The indicator light corresponding to the selected option will remain lit. : to select the desired DELAY TIMER button: press to set a delayed start for the selected wash cycle; the delay period appears on the display. START/PAUSE button and indicator light: when the green indicator light flashes slowly, press the button to start a wash cycle. Once the cycle has begun the indicator light will remain lit in a fixed manner. The cycle will reduce drum rotation to ensure washing results that are perfect for delicate garments. €¢ Press the button to enable the option; the indicator light corresponding to the button will switch on. €¢ Press the button again to disable the option; the indicator light will switch off. If the selected option is not compatible with the set wash cycle, the indicator light will flash and the option will not be activated. The options may affect the recommended load value and/or the duration of the cycle. The corresponding indicator light will turn green, remaining lit in a fixed manner, and the door will be locked (the DOOR LOCKED symbol will be lit). To change a wash cycle while it is in progress, pause the washing machine using the START/PAUSE button (the START/PAUSE indicator light will flash slowly in an amber colour); then select the desired cycle and press the START/PAUSE button again. To open the door while a cycle is in progress, press the START/PAUSE button; if the DOOR LOCKED symbol is switched off the door may be opened (wait approximately 3 minutes). Press the START/PAUSE button again to restart the wash cycle from the point at which it was interrupted. This will be indicated by the text “END” on the display; when the DOOR LOCKED symbol switches off the door may be opened (wait approximately 3 minutes). If you wish to cancel a cycle which has already begun, press and hold the button. [. . . ] Pre-treatment with special additives is recommended if there are obstinate stains. Anti Stain Quick: this programme is ideal for washing the most difficult daily stains in 1 hour. It is ideal for mixed fabrics and coloured garments, caring for your clothes as it washes. The programme is designed to maintain the brightness of white clothes over time. [. . . ]