User manual HOTPOINT FK 83 0 X/HA S

[. . . ] Reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Cleaning and user maintenance shall not be made by children without supervision. Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can scratch the surface, which may result in shattering of the glass. WARNING: Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric shock. [. . . ] Use the “ ” and “ ” buttons to adjust the time; if you press and hold either button, the display will scroll through the values more quickly, making it quicker and easier to set the desired value. Wait for 10 seconds or press the button again to finalise the setting. This function does not interrupt cooking and does not affect the oven; it is simply used to activate the buzzer when the set amount of time has elapsed. Press the button several times until the icon and the three digits on the display begin to flash. Use the “ ” and “ ” buttons to set the desired time; if you press and hold either button, the display will scroll through the values more quickly, making it quicker and easier to set the value. Wait for 10 seconds or press the button again to finalise the setting. Press the button several times until the icon and the three digits on the DISPLAY begin to flash. Use the “ ” and “ ” buttons to set the desired duration; if you press and hold either button, the display will scroll through the values more quickly, making it quicker and easier to set the value. Wait for 10 seconds or press the button again to finalise the setting. When the set time has elapsed, the text END appears on the DISPLAY, the oven will stop cooking and a buzzer sounds. A cooking duration must be set before the cooking end time can be scheduled. Next, press the button until the icon and the four digits on the DISPLAY begin to flash. Use the “ ” and “ ” buttons to adjust the cooking end time; if you press and hold either button, the display will scroll through the values more quickly, making it quicker and easier to set the desired value. Wait for 10 seconds or press the button again to finalise the setting. When the set time has elapsed, the text END appears on the DISPLAY, the oven will stop cooking and a buzzer sounds. The Programming has been set when the DISPLAY shows the cooking end time and the cooking duration alternately. Cancelling a programme To cancel a programme: • press the button until the icon corresponding to the setting you wish to cancel and the digits on the display are no longer flashing. Press the “ ” button until the digits 00:00 appear on the display. € Press and hold the “ ” and “ ” buttons; this will cancel all the settings selected previously, including timer settings. FAST COOKING mode The heating elements and the fan are activated, guaranteeing the distribution of heat consistently and uniformly throughout the oven. This mode is particularly suitable for cooking pre-packed food quickly (frozen or pre-cooked). MULTILEVEL mode All the heating elements (top, bottom and circular) switch on and the fan begins to operate. [. . . ] GB General safety Respecting and conserving the environment • Whenever possible, avoid pre-heating the oven and always try to fill it. Open the oven door as little as possible because heat is lost every time it is opened. To save a substantial amount of energy, simply switch off the oven 5 to 10 minutes before the end of your planned cooking time and use the heat the oven continues to generate. € Keep gaskets clean and tidy to prevent any door energy losses • If you have a timed tariff electricity contract, the “delay cooking” option will make it easier to save money by moving operation to cheaper time periods. [. . . ]