User manual HOTPOINT DD 642 /HA

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HOTPOINT DD 642 /HA. We hope that this HOTPOINT DD 642 /HA user guide will be useful to you.


HOTPOINT DD 642 /HA : Download the complete user guide (2530 Ko)

You may also download the following manuals related to this product:

   HOTPOINT DD 642 /HA (3861 ko)
   HOTPOINT DD 642 /HA (2469 ko)

Manual abstract: user guide HOTPOINT DD 642 /HA

Detailed instructions for use are in the User's Guide.

[. . . ] DD 642 /HA(CH) DD 642 /HA(MR) DD 642 /HA(SL) Italiano Istruzioni per l’uso PIANO Sommario Istruzioni per l’uso, 1 Avvertenze, 2 Assistenza, 4 Descrizione dell’apparecchio, 5 Installazione, 6 Avvio e utilizzo, 10 Precauzioni e consigli, 10 Manutenzione e cura, 11 Anomalie e rimedi, 11 English Operating Instructions HOB Contents Operating Instructions, 1 Warnings, 2 Assistance, 4 Description of the appliance, 5 Installation, 13 Start-up and use, 17 Precautions and tips, 17 Maintenance and care, 18 Troubleshooting, 18 Avvertenze ATTENZIONE: Questo apparecchio e le sue parti accessibili diventano molto caldi durante l’uso. Warnings WARNING: The appliance and its accessible parts become hot during use. Children less than 8 years of age shall be kept away unless continuously supervised. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. [. . . ] Before connecting to the power supply, make sure that: • the appliance is earthed and the plug is compliant with the law. €¢ the socket can withstand the maximum power of the appliance, which is indicated on the data plate. €¢ the voltage is in the range between the values indicated on the data plate. €¢ the socket is compatible with the plug of the appliance. If the socket is incompatible with the plug, ask an authorised technician to replace it. Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible. The cable must be checked regularly and replaced by authorised technicians only (see Assistance). The manufacturer declines any liability should these safety measures not be observed. Connection to the gas system must be carried out in such a way as not to place any strain of any kind on the appliance. There is an adjustable L-shaped pipe fitting on the appliance supply ramp and this is fitted with a seal in order to prevent leaks. The seal must always be replaced after rotating the pipe fitting (seal provided with appliance). These pipes must be installed so that they are never longer than 2000 mm when fully extended. Once connection has been carried out, make sure that the flexible metal pipe does not touch any moving parts and is not compressed. Only use pipes and seals that comply with current national regulations. When the installation process is complete, check the pipe fittings for leaks using a soapy solution. Adapting to different types of gas To adapt the hob to a different type of gas other than default type (indicated on the rating plate at the base of the hob or on the packaging), the burner nozzles should be replaced as follows: 1. Unscrew the nozzles using a 7 mm socket spanner, and replace them with nozzles for the new type of gas (see table 1 “Burner and nozzle characteristics”). Reassemble the parts following the above procedure in the reverse order. Once this procedure is finished, replace the old rating sticker with one indicating the new type of gas used. €¢ Adjusting the burners’ primary air Does not require adjusting. Remove the knob and adjust the adjustment screw, which is positioned in or next to the tap pin, until the flame is small but steady. Having adjusted the flame to the required low setting, while the burner is alight, quickly change the position of the knob from minimum to maximum and vice versa several times, checking that the flame does not go out. [. . . ] Maintenance and care Switching the appliance off Cleaning the hob surface Disconnect your appliance from the electricity supply before carrying out any work on it. €¢ All the enamelled and glass parts should be cleaned with warm water and neutral solution. €¢ Stainless steel surfaces may be stained by calcareous water or aggressive detergents if left in contact for too long. €¢ Clean with warm water and neutral detergent, and then dry with a soft cloth or chamois. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HOTPOINT DD 642 /HA




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HOTPOINT DD 642 /HA will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.