User manual HOTPOINT CP98SP6FHAX

[. . . ] Warnings WARNING: The appliance and its accessible parts become hot during use. Children less than 8 years of age shall be kept away unless continuously supervised. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Cleaning and user maintenance shall not be made by children without supervision. [. . . ] Proceed as follows: thread the meat you wish to cook onto the rod positioned across the oven lengthwise, fixing it in place with the adjustable forks supplied . If you wish to switch the light on without activating any of the heating elements, set the thermostat knob to 0°C. Timer (Electric oven) The programmer makes it possible to preset the oven and the grill in terms of: • delay start with a preset length of time for cooking; • immediate start with a preset length of time for cooking; • timer. Button functions: : Timer with hour and minutes; : Length of cooking time; : End cooking time; : Manual change; : Change time (backwards); : Change time (forwards). How to Reset the Digital Clock After the appliance has been connected to the power source or following a power outage, the clock display will begin to blink and read: 0:00 • Press the buttons at the same time. And buttons At the end of the cooking time, an acoustic signal will sound. Immediate Start Time with Preset Cooking Length When only the length of the cooking time is set (points 1 and 2 of the paragraph entitled, “Delayed Start Time with Preset Cooking Length”), the cooking session starts immediately. Cancelling a Preset Cooking Time Press the button, and use the button to set the time to: GB Manual Operation Mode for the Oven After the time has been set, the programmer is automatically set to manual mode. Note: Press the button to return the oven to manual mode after every “Automatic” cooking session. Delayed Start Time with Preset Cooking Length The length and the end cooking times must be set. Turn the oven control knob to the cooking setting and temperature desired (example: convection oven at 200°C). Press the and the use (within 4 seconds) the and buttons to set the length of the cooking time. Let us suppose that 30 minutes was set for the length of the cooking time. In this case, the display will show: Then press the manual cooking mode button . Release the button, and within 4 seconds, the current time will reappear with the symbol and “auto. Press the button, and then use the and buttons to set the end cooking time. Let us suppose that it is 13:00 Timer Feature The timer can be used to count down from a given length of time. This feature does not control when the oven comes on or turns off, but, rather, it only emits an acoustic signal when the preset time has run out. Release the button and the display will show the current time within 4 seconds: Then use the and buttons to set the desired time. When “auto” is lighted, it indicates that the length and end cooking time have been preset to operate in automatic mode. At this point, the oven will turn on automatically at 12:30 in order to finish the cooking session within 30 minutes. When the oven is on, the symbol (cooking pot) will appear on the display for the entire length of the cooking process. [. . . ] € After cooking where liquid has overflowed or when the dirt has not been eliminated completely (for example when grilling food, and the temperatures reached are not high enough for the full self-cleaning action of the enamel to be performed), we recommend you leave the oven on at maximum temperature so that all grease residue and the like are eliminated. € If, after long-term use, you find evident grease stains deposited on the self-cleaning oven walls, probably due to your failing to follow the above maintenance advice, clean the surfaces thoroughly with hot water and a soft cloth (do not use any detergents), then rinse and dry thoroughly. € Do not remove any dry caked-on grease using sharp objects, as these could etch the self-cleaning coating. € If the self-cleaning surfaces inside the oven are damaged or worn, due to incorrect or poor maintenance or after many years of use, you can request a kit of self-cleaning panels to line the inside of the oven. [. . . ]