User manual HOTPOINT CP058GTX

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HOTPOINT CP058GTX. We hope that this HOTPOINT CP058GTX user guide will be useful to you.


HOTPOINT CP058GTX : Download the complete user guide (1926 Ko)

Manual abstract: user guide HOTPOINT CP058GTX

Detailed instructions for use are in the User's Guide.

[. . . ] CARATTERISTICHE TECNICHE ENERGY LABEL Direttiva 2002/40/CE sull'etichetta dei forni elettrici Norma EN 50304 Consumo energia convezione Naturale: funzione di riscaldamento: Consumo energia dichiarazione: Classe convezione Forzata funzione di riscaldamento: 12 Statico - Ventilato Congratulations for choosing an Ariston appliance, which you will find is dependable and easy to use. We recommend you read though this booklet for the best performance and to extend the life of your appliance. This appliance has been designed for private, nonprofessional domestic use in the home. Read this instruction booklet carefully, as it provides important advice regarding safe installation, use and maintenance. [. . . ] This way, cleaning is kept right down to a minimum: as a matter of fact, you just need to rub the surfaces of the oven with a wet cloth regularly, after cooking, to remove the thin layer of ash that may have been deposited during cooking, in order to maintain the self-cleaning property of the oven intact. € After cooking where liquid has overflowed or when the dirt has not been eliminated completely (for example when grilling food, and the temperatures reached are not high enough for the full self-cleaning action of the enamel to be performed), we recommend you leave the oven on at maximum temperature so that all grease residue and the like are eliminated. € If, after long-term use, you find evident grease stains deposited on the self-cleaning oven walls, probably due to your failing to follow the above maintenance advice, clean the surfaces thoroughly with hot water and a soft cloth (do not use any detergents), then rinse and dry thoroughly. € Do not remove any dry caked-on grease using sharp objects, as these could etch the self-cleaning coating. € If the self-cleaning surfaces inside the oven are damaged or worn, due to incorrect or poor maintenance or after many years of use, you can request a kit of self-cleaning panels to line the inside of the oven. € The steel parts and especially the areas with the screenprinted symbols should not be cleaned with solvents or abrasive detergents. It is advisable to use only a damp cloth with lukewarm water and washing up liquid. Stainless steel may remain stained if in long-term contact with very calcareous water or aggressive detergents (containing phosphorus). It is therefore always necessary to rinse and dry all surfaces thoroughly after cleaning. Important: cleaning operations must be made horizontally, in the direction of the steel glazing. € After cleaning, any treatments to polish the surfaces may be performed: only use specific products for stainless steel. Important: do not use abrasive powders, aggressive detergents or acidic substances for cleaning. 6 Hob: • The removable parts of the burners on the hob should be washed frequently with warm water and soap, making sure to remove any caked-on substances. € Clean the end part of the automatic glow plug ignitors of the hob and gas oven frequently. Disassembling/assembling the oven door To make it easier to clean the inside of your oven, the oven door can be removed, by proceeding as follows (fig. 6-7): • Open the door completely and lift the 2 levers “B” (fig. 6); • Now, shutting the door slightly, you can lift it out by pulling out the hooks “A” as shown in figure 7. To reassemble the door: • With the door in a vertical position, insert the two hooks “A” into the slots; • Ensure that seat “D” is hooked perfectly onto the edge of the slot (move the oven door backwards and forward slightly); • Keep the oven door open fully, unhook the 2 levers “B” downwards and then shut the door again. 7 Greasing the taps As time passes, a tap may lock or become difficult to turn. In this case it will be necessary to clean inside and replace the grease. This procedure must be performed by a technician authorized by the manufacturer. Changing the oven lightbulb Make sure that the appliance is disconnected from the electricity supply. [. . . ] 5 5 Opening "X" (mm) liquid gas"G30-G31" 10 12 Electrical connection THE APPLIANCE MUST BE EARTHED The appliance is designed to work with alternating current at the supply voltage and frequency indicated on the rating plate (situated on the rear part of the appliance and on the last page of the instruction manual). Make sure that the local supply voltage corresponds to the voltage indicated on the rating plate. Connecting the supply cable to the mains electricity supply For models supplied without a plug, fit a standard plug, suitable for the load indicated on the rating plate, onto the cable and connect it to a suitable socket. 15 Burner Oven Grill Opening "X" (mm) natural gas"G20" 6. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HOTPOINT CP058GTX




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HOTPOINT CP058GTX will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.