User manual HOTPOINT CG 200 AX0

[. . . ] Be wary of steam if you wipe the unit with a damp sponge or cloth while it is still hot. Some cleaners can give off harmful fumes if they are applied to a hot surface. Isconnect the grill D maker from the main power after each use and prior to cleaning. Fter connecting the A grill maker, make sure that the red indicator is ON. [. . . ] If the surface is cracked, disconnect the device from the power supply to avoid any electrical shock. He T surface temperature can become very high when the appliance is operating. Lease do not touch P the switch next to the power cord when the grill is closed cooking. He T shell will automatically activate to the designed temperature when the grill opened up to 180°. In doing so, you have opted for an effective, high performing appliance. If the instructions for correct use of this appliance are not observed, the manufacturer’s liability for any resulting damage will be excluded. If the appliance is ever sold or transferred to another person, ensure that the new owner receives this user guide. Please familiarize yourself with these recommendations before installing and using your appliance. They have been written for your own safety as well as the safety of others. Place the unit away from water and do not use it near a swimming pool or a fountain. ASSEMBLY INSTRUCTIONS OPERATION & The Grill Maker is the ultimate kitchen appliance, offering you waffle baking and five separate cooking options by the removable reversible grill /griddle plates. Simply flip the reversible cooking plates and adjust the hinge to use as a contact grill, sandwich press, full grill, full griddle, or half grill/half griddle. Griddle / Grill 3 in 1 The flat griddle plates are ideal for pancakes and French toast. You can use 2 grill plates together or 2 griddle plates together or a combination of 1 grill plate and 1 griddle plate. 14 en it Always allow the appliance to cool for at least 30 minutes before removing the plates. Locate the plate release buttons which can be found on the right side of the unit 3. Press the upper release button firmly, and the upper plate will pop up slightly from the base. Lift the plate up and slide out from under the brackets in the centre. Selecting the cooking position Once you have fitted the cooking plates you intend to use, you need to select the cooking position. Fully open mode: push the button on handle’s end and push the handle back, until it is resting on the countertop and the upper and lower plates are at the same level. [. . . ] Once you have finished cooking, unplug the power cord and allow the appliance for at least 30 minutes before handling. If seafood has been cooked, wipe the cooking plate with lemon juice to prevent seafood flavor transferring to the next recipe. 15 en it The housing base, cover and control knobs can be wiped clean with a soft, dry cloth. In between recipes, scrape excess food buildup through the grease channel and into the drip tray, then wipe off any residue with a paper towel before proceeding with the next recipe. [. . . ]