User manual HOTPOINT CAWD 1297

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HOTPOINT CAWD 1297. We hope that this HOTPOINT CAWD 1297 user guide will be useful to you.


HOTPOINT CAWD 1297 : Download the complete user guide (2574 Ko)

You may also download the following manuals related to this product:

   HOTPOINT CAWD 1297 (396 ko)
   HOTPOINT CAWD 1297 (743 ko)

Manual abstract: user guide HOTPOINT CAWD 1297

Detailed instructions for use are in the User's Guide.

[. . . ] GB English, 1 GB F Français, 15 ES Español, 29 Contents Installation, 2-3-4-5 Unpacking and levelling Connecting the electricity and water supplies The first wash cycle Technical data Instructions for the fitter I Italiano, 43 Care and maintenance, 6 Cutting off the water or electricity supply Cleaning the washer dryer Cleaning the detergent dispenser drawer Caring for the door and drum of your appliance Cleaning the pump Checking the water inlet hose SWDD 129 Precautions and tips, 7 General safety Disposal Opening the porthole door manually Description of the washer dryer, 8-9 Control panel Display How to run a wash cycle or a drying cycle, 10 Wash cycles and functions, 11 Table of wash cycles Wash functions Detergents and laundry, 12 Detergent dispenser drawer Preparing the laundry Special wash cycles Load balancing system Troubleshooting, 13 Service, 14 1 Installation GB !This instruction manual should be kept in a safe place for future reference. If the washer dryer is sold, transferred or moved, make sure that the instruction manual remains with the machine so that the new owner is able to familiarise himself/ herself with its operation and features. Read these instructions carefully: they contain vital information relating to the safe installation and operation of the appliance. [. . . ] WASH CYCLE SELECTOR buttons: used to set the desired wash cycle (see “Table of wash cycles”). MEMORY button: press and hold the button to store a cycle with your own set of preferences in the memory of the machine. SPIN button : press to reduce or completely exclude the spin cycle - the value is indicated on the display. TEMPERATURE button : press to decrease the temperature: the value will be shown on the display. CONTROL PANEL LOCK button : to activate the control panel lock, press and hold the button for approximately 2 seconds. When the symbol is illuminated, the control panel is locked (apart from the ON/OFF key). This means it is possible to prevent wash cycles from being modified accidentally, especially where there are children in the home. To deactivate the control panel lock, press and hold the button for approximately 2 seconds. DELAYED START button : press to set a delayed start time for the selected wash cycle. START/PAUSE button with indicator light: when the green indicator light flashes slowly, press the button to start a wash cycle. Once the cycle has begun the indicator light will remain lit in a fixed manner. To pause the wash cycle, press the button again; the indicator light will flash in an orange colour. To start the wash cycle from the point at which it was interrupted, press the button again. Standby mode This washing machine, in compliance with new energy saving regulations, is fitted with an automatic standby system which is enabled after about 30 minutes if no activity is detected. Press the ON-OFF button briefly and wait for the machine to start up again. Consumption in off-mode: 0, 5 W Consumption in Left-on: 8 W 8 Display GB Z B A F X D C E Y F L F The display is useful when programming the machine and provides a great deal of information. The upper two strings A and B are used to display the selected wash cycle or the type of drying selected, the current wash cycle phase (the selected dryness level or drying time) and all the indications relating to the progress status of the cycle. String C shows the time remaining until the end of the wash cycle in progress and, if a DELAYED START has been set, the time remaining until the start of the selected wash cycle. String D shows the maximum spin speed value (this depends on the selected wash cycle); if the wash cycle does not include a spin cycle, the string remains unused. String E shows the maximum temperature value which may be selected (this depends on the wash cycle used); if the temperature of the wash cycle cannot be modified, the string remains unused. Indicator lights F correspond to the functions and light up when the selected function is compatible with the set wash cycle. Door locked symbol If the symbol is lit, this indicates that the washer dryer door is blocked to prevent it from being opened accidentally. [. . . ] By selecting this wash cycle ( at 30°C), it is possible to wash different fabrics together (except for wool and silk items), with a maximum load of 3 kg. Fastwash 15Min: this wash cycle was designed to wash lightly soiled garments quickly: it lasts just 15 minutes and therefore saves both energy and time. By selecting this wash cycle ( at 30°C), it is possible to wash different fabrics together (except for wool and silk items), with a maximum load of 1. Before contacting the Technical Assistance Centre (see “Assistance”), make sure that the problem cannot be solved easily using the following list. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HOTPOINT CAWD 1297




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HOTPOINT CAWD 1297 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.