User manual HOTPOINT ARL 105

[. . . ] Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Do not expose batteries or apparatus with battery-installed to excessive heat such as sunshine, fire or the like. The unit is not disconnected from the mains as long as it is connected to the AC outlet, even if the unit itself has been turned off. [. . . ] 3) Folder numbers are assigned serially thereafter up to the maximum 999. 5) A new file is created in the "REC1" folder each time REC1 is performed. 6 14GB Notes · When transferring music from a CD, the tracks are transferred as 128 kbps MP3 files. When transferring music from an MP3 disc, MP3 files are transferred at the same bit rate as that of the original MP3 files. · If you start transferring in shuffle play mode, repeat play mode or in program play mode (when no tracks or MP3 files are programmed), the selected play mode is automatically cancelled and the play mode switches to normal play mode. · While transferring music from an MP3 disc, no sound is output and "HI-SPEED" appears. · CD text information is not transferred in the created MP3 files. · If you cancel the process in the middle of music transfer, an incomplete MP3 file will be created up to the point when the transfer was stopped. · Transferring stops automatically if: ­ the USB device runs out of space. ­ the number of audio files on the USB device reaches the limit for the number that the system can recognize. · If the folder to be erased contains non-MP3/ WMA/AAC format files or sub folders, these are not erased. · If a folder or file that you are trying to transfer already exists on the USB device with the same name, a sequential number is added after the name without overwriting the original folder or file. To turn off the subwoofer, select "SW OFF, " and then press ENTER. * For example, you can view CD/MP3 disc information or the USB device information, such as: ­ track or file number during normal play. ­ total playing time and total number of tracks on the CD-DA disc (only when normal play mode is selected and the player is stopped). ­ total number of folders (albums) on the MP3 disc (only when normal play mode is selected and the player is stopped). ­ volume label if it exists on the disc or the USB device (only when normal play mode is selected and the USB device is in stop mode). The system offers the following display modes. Display mode When the system is off, Demonstration Power Saving Mode1) The demonstration is displayed. The clock is displayed. Clock2) 1) You cannot set the clock in Power Saving Mode. 2) The clock display automatically turns to Power Saving Mode after 8 seconds. 18GB Notes on the display information · Characters that cannot be displayed appear as "_". · The following are not displayed: ­ total playing time for an MP3 disc and USB device. · The following are not displayed correctly: ­ elapsed playing time of an MP3 file encoded using a VBR (variable bit rate). ­ folder and file names that do not follow either the ISO9660 Level 1, Level 2 or Joliet in the expansion format. · The following are displayed: ­ remaining playing time for a track. ­ ID3 tag information for MP3 files when ID3 version 1 and version 2 tags are used (ID3 version 2 tag information display has priority when both ID3 version 1 and version 2 tags are used for a single MP3 file). [. . . ] By default, the CD player/USB device power is turned off. 1 2 3 Press FUNCTION repeatedly to select the CD function. After "STANDBY" stops flashing, press DISPLAY to display the clock and then press ?/1 on the unit while holding down x on the unit. Turning the CD player/USB device power on, decreases disc access time and improves loading performance. If there is poor tuner reception when the CD player/USB device power is turned on, return the setting to default. [. . . ]