User manual HOTPOINT-ARISTON HBMW21

[. . . ] Certain countries may regulate disposal of the battery used to power this product. Caution The use of optical instruments with this product will increase eye hazard. The validity of the CE marking is restricted to only those countries where it is legally enforced, mainly in the countries EEA (European Economic Area). 21 When you do not want "LP:" added automatically at the beginning of a track . [. . . ] Items may appear differently or may not be selectable, depending on group mode's on/off status, the recorder's operating status, or the recorder settings. If you want to check the remaining time or the recording position while recording or in stop mode, see page 27. You can edit your recordings by adding/ erasing track marks or labeling tracks and MDs. â· If you perform an editing operation while playing, be sure not to turn the power off until "Edit" disappears in the display. â· Do not move the recorder while "Edit" is flashing in the display. â· The lid will not open until "Edit" disappears in the display after editing. â· When group mode is on, editing can be performed only for the tracks registered into the selected group. "FULL" appears when you try to enter more than 1, 700 characters on a disc. Enter a shorter name for the track, group, or disc, or set the "LPStmp" setting to "OFF" when recording in MDLP mode so that "LP:" is not be added at the beginning of the track name (page 22). â· When labeling a disc which has been recorded using the group function, make sure group mode is on in order to prevent the group management information from being overwritten by mistake. â· If you enter the symbol "//" between the characters in disc names such as "abc//def", you may be unable to use the group function. Do the following procedure to register tracks or groups as a new group. If the desired tracks or groups are not consecutive, you must move them to make them consecutive before you can register them ("Moving recorded tracks", page 38). The operation of this function depends on whether group mode is on or off. â· When group mode is ON: Several groups are registered as one group. â· When group mode is OFF: Several tracks are registered as one group. The recorder is able to display, but cannot label using Japanese "Katakana" characters. â· The recorder cannot rewrite a disc or track name of more than 200 letters that was created by another device. Registration of non-consecutive tracks is not possible (for example, track 3 cannot be registered into a group with track 5 to 7). â· Tracks always appear according to their order on the disc, not their order within the group (even when group mode is on). Repeatedly until the number or name of the desired last track flashes in the display, and then press ENTER. The track number of the last track in the group ("END") appears in the display. [. . . ] Changing the sound quality of the preset sound ("SOUND1" or "SOUND2") (page 32). LPStmp -- Selecting "ON" ("LP:" will be added at the beginning of the track name) or "OFF" (page 22). Menu items that can be selected vary according to the on/off status of group mode or the operating status of the recorder. The menus provided on the recorder for each operating status are shown on this and the following pages. [. . . ]