User manual HOTPOINT-ARISTON AQUALTIS AQGMD 149

[. . . ] Running a wash cycle, 20 Programmes and options, 21-22 Keep this instruction manual in a safe place for If the appliance is sold, given away or moved, please ensure the manual remains with the machine so that the new owner may benefit from the advice contained within it. Contains important information regarding the safe installation, use and maintenance of the appliance. Please read this instruction manual carefully it Stable and much less likely to cause vibrations and noise during the spin cycle. If positioned on a fitted carpet or a rug, adjust the feet in such a way as to allow room for air to circulate and provide ventilation beneath the washer-dryer. [. . . ] By pressing the rature can be progressively reduced or even set to button, the cold wash OFF. by pressing the spin speed can be progressively reduced or even eliminated altogether OFF. Press the button to activate the option; the name of the option will then appear on the display and the corresponding indicator light will illuminate. Press the button again to deactivate the option; the name of the option will then appear on the display followed by the text OFF, and the corresponding indicator light will switch off. If the selected option is not compatible with the Set programme, the indicator light will flash and the option will not be activated. If the selected option is not compatible with another option that has been selected previously, the indicator light corresponding to the first option selected will flash and only the second option will be activated; the indicator light corresponding to the active option will remain lit in a constant manner. The options may affect the recommended load The corresponding indicator light remains lit in a fixed manner and the porthole door locks (the DOOR LOCKED indicator light illuminates). During the wash cycle, the display will show which stage is currently in progress and the icon corresponding to each stage will illuminate. To change a programme while a cycle is in progress, pause the washer-dryer by pressing the START/ PAUSE button; then select the desired cycle and press the START/PAUSE button again. To open the door while a cycle is in progress press the START/PAUSE button; if the DOOR LOCK indicator light switches off it is possible to open the door. Press the START/PAUSE button again to resatrt the programme from the point at which it was interrupted. If you wish to cancel a cycle that has already To set a delayed start for the selected programme, press the corresponding button repeatedly until the required delay period has been reached. when this symbol appears option has been activated , the on the display. To remove the delayed start option, press the button until the display shows the text symbol will disappear. COTTON COLOURFAST SYNTHETICS DELICATE FASTWASH: Refreshes lightly soiled garments quickly (not recommended for wool, silk or clothes that should be washed by hand). Super Wash This option guarantees a high-performance wash, thanks to the use of a greater quantity of water during the initial phase of the cycle and a longer overall duration of the programme. It is not compatible with the Fastwash, Silk, Wool, partial programmes and Drying programmes. Reduce creases If this option is selected, the wash and spin phases will be adjusted accordingly so that fabric creasing is reduced. When using the Silk programme, the machine will end the cycle while the laundry is soaking and the Reduce creases and START/PAUSE indicator lights will flash. It is particularly recommended for skin types that are sensitive to detergents. We recommend this programme is used when the washer-dryer is full or when a large amount of detergent has been used. This option is not compatible with the Fastwash, Fast Spin, Pump out and Drying programmes. [. . . ] Disconnect the appliance from the electricity supply before cleaning it and before performing any maintenance work on it. Remove the kick strip on the front of the machine using a screwdriver (see figure); The exterior of the appliance and all rubber parts may be cleaned using a cloth soaked in warm soapy water. Unscrew the cover, turning it in an anticlockwise direction (see figure); Clean the inside thoroughly; 5. Replace the kick strip, making sure that the hooks are positioned in the right slots before pushing the panel towards the machine. [. . . ]