User manual HOOVER TMI2003 011 MISTRAL EASY PARQUET

[. . . ] To release the hose: simply press the two hose release buttons on the hose end and remove hose. Use your cleaner out of doors or on any wet surface or for wet pick up. Pick up hard or sharp objects, matches, hot ashes, cigarette ends or other similar items. Spray with or pick up flammable liquids, cleaning fluids, aerosols or their vapours as this may cause risk of fire / explosion. [. . . ] Carpet & Floor Nozzle** - Press the floor type selector pedal on the nozzle [7] to select the ideal cleaning mode for the floor type. Switch the cleaner on by turning the On - Off / Variable Power Control Roller clockwise on the cleaner main body. Adjust the power level by turning the On-Off / Variable Power Control Roller to the desired level. Switch off at the end of use turning the On-Off / Variable Power Control Roller. [8] Unplug and gently pull the cord, the cord will begin to automatically retract back into the cleaner. Hold the Dust Container over a bin with one hand, Hold the dust container upside down so that the pre-motor filter faces upwards. Unlatch then unhinge the pre-motor filter frame and remove the pre-motor filter from the frame. [22] Remove excess water from the filters with a dry cloth and leave to dry fully before re-using. IMPORTANT: Do not use the product without the pre-motor filter pack fitted. Unlock the exhaust filter cover by sliding the button towards the rear of the cleaner. [22] Remove excess water from the filters with a dry cloth and leave to dry fully before re-using. In the unlikely event of the filters becoming damaged, fit a Genuine Hoover consumable. The flexible hose and tube can be parked for temporary storage while in use [10] or in the Nanopack storage position when not in use [17]: 1. Lift the hose latch at the rear of the cleaner [13] and wrap the flexible hose around the product. Assemble the telescopic tube into the remaining parking slot underneath the product. [17] CLEANER MAINTENANCE Emptying the Dust Container When the dust reaches the max level indicator on the container, empty the dust container. IMPORTANT: To maintain optimum performance do not allow the dust to sit higher than the max level. Press the dust container release buttons on the bin cover [18] and lift the dust container out of cleaner. [19] *Certain models only ** Nozzle design may vary according to model 2 MistralManual__1-4_union. 44 GB USER CHECKLIST Should you have a problem with the product, complete this simple user checklist before calling your local Hoover service. Check if there is any other blockage in the system - Use a rod or a pole to remove any blockage from the tubes or hose. Warning - If the cleaner is used for a significant period of time with a blockage, a thermal cut out will switch the cleaner off to prevent overheating. [. . . ] The Environment: This appliance is marked according to the European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The symbol on the product indicates that this product may not be treated as houshold waste. Instead it shall be handed over to the appliance collection point for recycling of electrical and electronic equipment. [. . . ]