User manual HOOVER TFS 7182

[. . . ] Stand on or wrap the power cord around arms or legs when using the cleaner. Remove the cyclonic cassette before removing the hose from the cleaner. [. . . ] Wrap the hose around the product before fitting the hose handle and floor nozzle into the locations provided on the tool storage bracket (P16). Please empty the cassette after each use of the cleaner or if the cassette-check indicator is illuminated (P17). Hold the cassette upside down so that the outer filter panel faces upwards. Unlatch then unhinge the outer filter panel and remove from the cassette(P20). Use the brush nozzle (P12) when necessary to remove excessive dust from the internal surface of the cassette. Close the inner filter cover ensuring the latch is located, replace the outer filter panel ensuring it is hinged and latched securely (P22 & P23). Re-fit the Freespace cyclonic cassette into the cleaner and push down on the cassette to secure. Important: The hose must be removed before removing or replacing the cyclonic cassette. remember: The cassette check indicator will also illuminate if an obstruction has occurred. In this case refer to the section "Removing a blockage from the system". IMPORTANT: The cyclonic cassette is fitted with 2 filters wich MUST BE CHECKED AND EXCESS DUST REMOVED each time the cassette is emptied. To remove dust, tap the filter against the side of the bin to shake free excess dust. [. . . ] Instead it shall be handed over to the applicable collection pint for the recycling of electrical and electronic equipment. Disposal must be carried out in accordance with local environmental regulations for waste disposal. [. . . ]