User manual HOOVER TC 5235

[. . . ] Press it again to stop the cleaner before removing the plug after use. In this event extract the plug from the socket and allow cleaner to cool for 30 minutes. Check if the Cyclonic cassette needs cleaning or if there is a blockage in the system (see chapter: “Filter Maintenance” and “Removing A Blockage From The System”). Adjust the suction by moving the handle valve (I): suction will decrease when opening the valve. [. . . ] To wash and optimise the performance the following simple steps should be taken: • Shake out the Cyclonic Cassette to remove large dirt and debris (Q) as described in “Emptying The Dust Manager Cyclonic Cassette. € • Brush the inside of the Cyclonic Cassette to remove the fine dust that may have formed on the walls of the Cyclonic Cassette (R). € Remove excess water with a dry cloth and leave to air dry for 24 hours or until fully dry. € After completing the washing and drying operations, locate the filters in their original position. To maintain best performance we recommend that you wash the filters in the cleaner every month. € Do not scrub the filters, use washing up liquid or place in a dishwasher. GB • Remove excess water with a dry cloth and leave to air dry for 24 hours or until fully dry (Y). € After completing the washing and drying operations, locate the filters in their original positions in the cleaner. REMOVING A BLOCKAGE FROM THE SYSTEM If there is a noticeable drop in the performance see the following 2 points: 1) Check if the Cyclonic Cassette is full (If so refer to chapter “Emptying The Dust Manager Cyclonic Cassette” 2) If not full then: a) Have you cleaned the Cyclonic Cassette filters recently?€ Use a rod or pole to remove any blockage from the tubes and flexible hose. € It may also be possible to remove an obstruction in the flexible hose by lightly squeezing or bending it. € Check and clean if required the underside of the nozzle by using the crevice tool. SIMPLE USER CHECK LIST BEFORE CALLING FOR SERVICE 1) Is there a working electricity supply to the cleaner? please refer to chapter “Features” , paragraph “Overheating Protection”. Please remember that: 1) Some carpets can cause a small build up of static electricity. 2) A service charge will be made if the cleaner is examined and found in working order, has not been assembled in accordance with these instructions, or has been misused. gB DO • Call Hoover Customer Help Line 08705 400 600 in the event of dissatisfaction. € Ensure that all service and repairs are carried out by an authorised Hoover Service Engineer. [. . . ] The bill of sale or receipt must be produced when making any claim under the terms of this guarantee. GIAS Customer Service 08705 400 600 Hoover Spares 01204 556 111 Quality: Our UK factories meet the strict quality standards of the British Standards Institution (BSI). Safety: We gain independent approval from BEAB to demonstrate that our domestic electrical appliances are safe. BEAB – the British Electrotechnical Approvals Board – ensures that European safety standards are met and maintained throughout the production life of an appliance. [. . . ]