User manual HOOVER SFD 4101

[. . . ] The iron on its stand, make sure that the surface on which you place it is stable. Please make it check by an authorized Service Centre to avoid any danger. That iron switch (1G) needs to be switched on for heating up the boiler (only with professional iron). You can press the steam trigger and steam will escape from the soleplate. [. . . ] If the temperature is too low, some drops of water could escape from the soleplate. Please raise up the temperature abov to avoid this issue 9 48001378-1 - Ironspeeed_SR_final. 2 - Ironing Dry Ironing Domestic Iron Models: Select the temperature of the soleplate following the indications of chapter 3. Start your ironing without pressing the steam trigger (13), when the soleplate reaches the appropriate temperature. Select the temperature of the soleplate following the indications of chapter 3. Start your ironing when the soleplate reaches the appropriate temperature. Steam Ironing Select the temperature of the soleplate following the indications of chapter 3. On the stand, when the steam will be ready to be used, the dedicated lamp (1d) will Technology selector (14) in order to achieve the best results. C M Only Professional Iron Models: Y CM Steam lock function: The steam lock allows you to steam iron without pressing the steam trigger. To activate or deactivate the steam lock, slide forwards or backwards the steam lock (13). During the use, you should hear some noise coming from your steam generator. MY CY CMY K avoid using the steam trigger at this precise moment to avoid pressure falls. For obtaining the best results, it is really important to set perfectly the temperature unique Multi-Steam Selector selector (14) which will provide outstanding results if correctly use and will simplify your ironing, making it easier and faster. Thanks to this innovative Multi-Steam Technology implemented in the appliance, you can use steam on mainly all textiles having the best results ever. Indd 9 11-12-2009 9:59:57 Here are the suggestions to obtain the best results: Textile Wrinkled Textiles Tricky Zone Jeans Cotton Linen Starched Clothes Velvet/Alcantara Wool Silk Cashmere Rayon Polyester Acrylic Lycra Polyamid Steam Type Precise Power Precise Power Profound Care Profound Care Profound Care Profound Care Profound Care Profound Care Diffuse Caresse Diffuse Caresse Diffuse Caresse Soleplate T°C Max Max Max Diffuse Caresse in front of the iron on a large part of textile. Fibres are better loosened in order to take away delicately and faster all the creases. Difficult zones are better humidified and hence creases removed faster. Help When steam ironing clothes on which shiny patches may occur, we recommend you to set the soleplate temperature to a lower temperature or to iron the garment on the reverse. 4 - Vertical Steam Ironing Set the soleplate temperature (12) to the max temperature and set the Multi-Steam Technology selector (14) to the Profound care program. Hold the iron in vertical position at a short distance of the fabric to avoid burning it. Press the steam trigger (13) to steam iron moving it from top to bottom. When the water tank is empty, the “Empty water tank” light (1b) is on. [. . . ] Then you can take away your appliance in order to store it safely and easily. Indd 13 11-12-2009 9:59:58 Troubleshooting Problem The appliance does not become hot Cause There is a connection problem The appliance is not switched on The soleplate temperature is too low Solution Check the mains cord, the plug and the wall socket Press on the on/off switch Set a higher temperature of the soleplate Press on the on/off switch Wait a few moments until the steam ready LED is off Refill the water tank Press the steam trigger It works but steam is not visible as very hot and dry Switch off the appliance and let it cool down. The symbol on the product indicates that this product may not be treated as household waste. Instead it shall be handed over to the appliance collection point for recycling of electrical and electronic equipment. [. . . ]