User manual HOOVER SRD 4110

[. . . ] Please make it check by an authorized Service Centre to avoid any danger. That iron switch (1G) needs to be switched on for heating up the boiler (only with professional iron). You can press the steam trigger and steam will escape from the soleplate. [. . . ] For obtaining the best results, it is really important to set perfectly the temperature unique Multi-Steam Selector selector (14) which will provide outstanding results if correctly use and will simplify your ironing, making it easier and faster. Thanks to this innovative Multi-Steam Technology implemented in the appliance, you can use steam on mainly all textiles having the best results ever. Precise Power Precise Power Profound Care Profound Care Profound Care Profound Care Profound Care Profound Care Di use Caresse Di use Caresse Di use Caresse In front of the iron on a large part of textile. Fibres are better loosened in order to take away delicately and faster all the creases. Help When steam ironing clothes on which shiny patches may occur, we recommend you to set the soleplate temperature to a lower temperature or to iron the garment on the reverse. Hold the iron in vertical position at a short distance of the fabric to avoid burning it. Press the steam trigger (13) to steam iron moving it from top to bottom. When the water tank is empty, the "Empty water tank" light (1b) is on. No more steam escapes from the soleplate and steam ironing is no longer possible. The professional steam brush attached on your ironing system can be used to iron in a vertical position to easily remove creases on delicate textiles, remove odours such as smoke from textiles and refresh worn garments. Switch on the appliance and when the steam ready LED lights up, the steam brush is ready to use. All the maintenance and cleaning operations have to be done when the unplugged appliance has cooled down for at least 2 hours, to prevent any risk of burns. Do not use any detergent or descaling products for cleaning the soleplate. In order to extend the life of your appliance, you should rinse the boiler to avoid scale deposit in the boiler. You should rinse it every 2 months or wait until the "rinse" light (1e) ashes. Models with "Rinse" Light Only remember to clean the boiler before use next time you plan to iron. Proceed as followed: Before going on, be sure that the appliance is cooled down and unplugged for at least 2 hours. Unscrew the boiler rinse safety cap anti-clockwise with a coin and remove it. [. . . ] The symbol on the product indicates that this product may not be treated as household waste. Instead it shall be handed over to the appliance collection point for recycling of electrical and electronic equipment. Disposal must be carried out in accordance with the local environmental regulations for waste disposal. [. . . ]