User manual HOOVER S2IN1300C

[. . . ] Do not use the appliance to clean or direct steam towards animals, people or plants. Liquid or steam must not be directed towards equipment containing electrical components, such as the interior of ovens. Avoid contact with steam. 1 Do not stand on or wrap the cord around arms or legs when using your appliance. When using the cleaning tools ensure to always steady the appliance with your other hand. [. . . ] Rotate Water Tank Cap one quarter turn in “Unlock” direction (anti-clockwise) indicated by illustration on Cap, and remove. 2 GB 3. Carefully fill Measuring Cup with maximum amount of water 450 ml and pour into Water Tank through the fill hole. NOTE: In order to significantly reduce mineral build-up and prolong the life of your steam mop the use of distilled or de-mineralized water in the unit is highly recommended. Replace Water Tank Cap so that thread grooves on the bottom of Cap align with tabs inside fill hole. Press Water Tank Cap down so that it sits flush with top of fill hole. Rotate one quarter turn in clockwise direction (as indicated by “Lock” illustration on Cap) to lock it in place. NOTE: The tube which transfers water from the Water Tank to the boiler is weighted down with a brass ball. It is normal for this ball to create a rattling sound inside of Water Tank during use. GENERAL OPERATION NOTE: Be sure that the Water Tank has been filled and all desired accessories are connected before following these steps. Plug power cord into a convenient electrical outlet (a properly rated extension cord may be used if necessary). Turn Steam Control Dial clockwise from “OFF” to “MAX”, Power light will illuminate in red. [9] NOTE: The desired steam intensity setting depends on the current steaming task. After approximately 30 seconds, the indicator light in blue color will be illuminate & you will hear a buzzing sound as unit begins to emit steam. Direct Steam Nozzle (with any connected accessories) towards surface you wish to steam. CAUTION: Always be sure that Steam Nozzle and any accessories are pointed in a safe direction (away from yourself, other people, pets and plants) when steam is being emitted. METHODS OF USE FOR STEAM MOP Please inspect carefully if the Extension Pole, Mop Head and Micro-fiber Mop Pad are assembled correctly. Use a steady back-and-forth motion over the floor, pushing Mop away and pulling it back towards you. Work your way backwards over the floor, in order to avoid walking over the freshly mopped area. However, depending on floor surface and steam intensity setting some residual moisture may be left behind. A fan may be directed towards mopped area to facilitate faster drying. NOTE: To avoid warping or damage caused by heat and moisture, the steam mop should only be used on properly sealed floor surfaces. Always test on a small area of your flooring prior to overall use on every floor surface. Make sure desired cleaning accessories (Jet Nozzle, Utility Brush, and Utility Head with window squeegee) are properly connected. [. . . ] •  You may not wait for enough time (30 seconds) when switch on. •  You may not turn steam control dial from “OFF“ to a desired steam rate position. Steam Control Dial is set to MAX. Rattling sound is heard coming from Water Tank. Sound is being caused by weighted brass ball connected to end of water tube inside Tank. 4 important Information Hoover spares and Consumables Always replace parts with genuine Hoover spares. These are available from your local Hoover dealer or direct from Hoover. [. . . ]