User manual HOOVER OCTOPUS

[. . . ] Run over the supply cord whilst using the cleaner or remove the plug by pulling on the cord. Stand on or wrap the power cord around arms or legs when using your cleaner. [. . . ] Open cover, pull the bag collar to remove the bag from the bag chamber. Fold a new bag as shown (Picture 16) and fit by inserting the bag collar into the location grooves, as shown (Picture 17) Part no: H36 - 09185091 Push the cover into the closed position. Press pause for short stops, when finished, switch off by pressing the on/off button. In this case refer to the section "Removing a blockage from the system" Cleaning the lifetime washable filters - To maintain peak performance of your cleaner please wash the filters after 5 bag changes. Please wash them with handwarm water and allow the filters to dry thoroughly before replacing into the cleaner. REMEMBER: Always press the on/off button to completely switch off the cleaner. Pre-motor filter - Remove pre-motor filter, wash under handwarm water and dry thoroughly before replacing into cleaner. turbo Nozzle - Turbo Nozzle - Use the turbo nozzle for deep cleaning on carpets. IMPORTANT: Do not use the turbo nozzle on rugs with long fringes, animal hide and over carpet tiles with a depth exceeding 15mm. - If so refer to page 5 - 'Cleaner Maintenance - Cleaning the lifetime washable filters'. Check if there is any other blockage in the system: - Use a rod or pole to remove any blockage from the tubes and flexible hose. it may also be possible to remove an obstruction in the zoom tube by lightly squeezing or bending it. [. . . ] YOUR GUARANTEE The guarantee conditions for this appliance are as defined by our representative in the country in which it is sold. Details regarding these conditions can be obtained from the dealer from whom the appliance was purchased. [. . . ]