User manual HOOVER NDEH10A2TCBEXS-S

[. . . ] We are proud to offer the ideal product for you and the best complete range of home appliances for your daily routine. Please read and follow these instructions carefully and operate the machine accordingly. This booklet provides important guidelines for safe use, installation, maintenance and some useful advice for best results when using your machine. Keep all documentation in a safe place for future reference or for any future owners. [. . . ] In models equipped with a water collection tray, the tray should be emptied after every drying cycle. To prevent the door sticking or the buildup of fluff clean the inner door and gasket with a damp cloth after every drying cycle. wARNING Always switch off and remove the plug from the electricity supply before cleaning this appliance. wARNING For electrical data refer to the rating label on the front of the dryer cabinet (with the door open). This appliance is equipped with Wi-Fi technology that allows you to control it remotely via App. APPLIANCE PAIRING (ON APP) Download the hOn App on your device by The App is available for devices running both Android and iOS, both for tablets and for smartphones. When the cycle has been completed, turn off the machine by turning the programme selector to the OFF position. tO DISABLE REMOTE CONTROL To exit REMOTE CONTROL mode while a cycle is underway, turn the programme selector to any position other than REMOTE CONTROL (Wi-Fi), without going through the OFF. With the door closed, turn the programme selector to the REMOTE CONTROL (WiFi) position to control the appliance using the app once again. Get all the details of the Wi-Fi functions by browsing the App in DEMO mode. You can not configure the machine if your home network is set to the 5 GHz band. To enable it again, close the door, turn the programme selector to any position other than REMOTE CONTROL and then select it again. Open the App, create the user profile (or log-in if it is already created previously) and pairing the appliance following the instructions on the device display. tO ENABLE REMOTE CONTROL Check that the router is switched on and connected to the Internet. Turn the programme selector to the REMOTE CONTROL (Wi-Fi) position : the controls on the control panel will be disabled. Gently close the door pushing it slowly until you hear the door 'click' shut. Select the desired drying programme by turning the programme knob or, in some models, by pressing the specific button (check the programme table for specific details). If the door is opened during the programme to check the laundry, it is necessary to press programme start to recommence drying after the door has been closed. When the cycle is nearing completion the machine will enter the cool down phase, the clothes will be tumbled in cool air allowing the load to cool down. Following the completion of the cycle the drum will rotate intermittently to minimize creasing. This will continue until the machine is switched OFF or the door is opened. Do not open the door during the automatic programmes in order to obtain a proper drying. [. . . ] The dryer provides an alert when the lightweight fabrics are dry and ready to are taking out (on the display the text AIO blinks for 3 minutes and an acoustic sound is emitted). After this step it's necessary to press start again to complete the drying for the leftovers heavier linens. FRESH CARE Thanks to Fresh Care cycle, the machine can take care of your different fabrics together (cotton and synthetic), drying them out even in 59'. If the load is less than the AUTO CARE The new Auto Care cycle is the new exclusive program that is capable to adapt its drying technology to the capacity and typology of clothes automatically. [. . . ]