User manual HOOVER INTERACT 3D

[. . . ] Please read and follow these instructions carefully and operate the machine accordingly. This booklet provides important guidelines for safe use, installation, maintenance and some useful advice for best results when using your machine. Keep all documentation in a safe place for future reference or for any future owners. Please check that the following items are delivered with the appliance: Instruction manual Guarantee card Blanking plug Inlet hose & hooked end support (see Unpacking and Installation Instructions) Base panel & x2 push clips Energy Label Your local council will be able to give you details of current means of disposal. [. . . ] When a new programme is selected the display will indicate that the programme has been cancelled as follows: To start another wash cycle the programme selector must be returned to OFF once again BEFORE the next programme can be selected and started. The following options should be selected BEFORE pressing the Start Pausa button. The light on each option button will come on if the option has been selected. By pressing the Centrifugado option button it is possible to reduce the maximum spin speed of your selected programme to suit your needs and to help reduce any creasing of fabrics. The light on the option button will come on if a spin speed lower than that stated in the programme guide has been selected. This option can be used on the Cottons (Algodón Resistentes, Colores, Delicados) and Synthetics (Sintéticos) programmes. By selecting the Reductor Tiempo option, the wash time can be reduced by up to 50 minutes, depending on the selected programme, temperature and load, without affecting the quality of the wash. This option is particularly useful for heavily soiled loads and can be used independently of the main wash programme. Detergent for this programme should be added to the first compartment of the soap drawer labelled "I" (please refer to The Dispenser 23 We recommend you use only 20% of the quantity used for the main wash programme. This washing machine is equipped with a variable temperature function. Greater energy savings can be achieved by setting the temperature between 15°C and 40°C. By setting the temperature to 15°C the wash temperature is equivalent to the water inlet temperature, thus reducing energy consumption further. We recommend that the temperature shown on wash care garments should never be exceeded. The machine will not accept a temperature input that is higher than that stated in the programme guide. The light on the option button will come on if a temperature lower than that stated in the programme guide has been selected. This option is available on the Cottons programmes (Algodón Resistentes, Colores, Delicados) and it increases the number of rinses to five (including the final conditioned rinse). This can help prevent skin irritation from detergent residue, which can affect people with particularly sensitive skin. Selecting the Aclarado No Alérgias button is also recommended when washing heavily soiled fabrics which need a lot of detergent, or when the wash load contains towelling fabrics that have a greater tendency to retain detergent. This option is only available on the Synthetics, Acrylics, Woolmark and Silk programmes. Programme Synthetics (Sintéticos) Fast Iron function The programme is completed by a short spin, of very low speed. The machine stops in the final rinse stage and the option indicators blink. The load is held in the water in the drum, thus reducing creasing and enabling easier ironing. [. . . ] If so, deselect the option and the programme will complete (see page 25 for complete explanation of the function). Ensure that the door glass and gasket are kept clean and free of laundry when loading the machine. Have you selected an option that changes the spin profile (Planchado Rapido or change of spin speed using the Centrifugado button)?To reduce noise and vibration and improve the machine's reliability and life, the machine is fitted with an electronic sensor that detects if the load is unbalanced. [. . . ]