User manual HOOVER HTV 913

[. . . ] A water leak detector fitted along the water inlet tube and a device installed on the water intake point auomatically cut off the water if a leak appears, even when the power is off. Table of programmes mod. ºC speed 160 160 90 90 nomal 85 9 25 4 delicates 70 50 50 150 160 44 30 40º 30º 30º 30º 40º 50º 50º 400 800 800 800 1000 800 800 1, 5 1, 0 2, 0 2, 0 2, 0 3, 5 2, 0 90º 60º 40º 60º 40º 1300 1300 1300 800 800 1300 800 programme COTTONS programme for Fast cottons Normal cottons Coloured cottons Máx. [. . . ] Intermediate spins during rinses are eliminated and the machine stops before the final spin, which is a gentle spin. Intermediate spins during rinses are eliminated and the machine stops before the final spin. Intermediate spins during rinses are eliminated To complete the wash cycle in the Delicates , Woollens, Hand wash and Mix&wash programmes, press the Easy Iron key again: the machine will empty and perform the required spin. To empty machine of water with no spin, cancel the ongoing programme and select the Empty programme. C4: extra rinse key The electronic system engaged by this key activates a new special rinse cycle. More water and a combination of drum rotation movements ensure that washing is perfectly rinsed. The key can be activated in Cottons, Mixed, Synthetics, Delicates, Rinse, Woollens, Sportswear and AA40 programmes. By pressing this key you can choose the final spin speed, but only within the range of speeds of the programme selected. These speeds are indicated at the top left of the display (number displayed multiplied by 100). You can select speed at any point in the programme. mmmmmmm In order to cancel spin completely, you need only set the speed indicator number at zero. 6. - Alternatively, if you wish, you can use the key C8 to choose washing temperature. With this key you can select washing temperature, but only within the temperature range of the programme selected. Preferably you should select temperature before the programme is started. 7. - To start the programme, once options have been chosen, press the key H. [. . . ] Then, after approximately five minutes, the screen will display: programme paused and door open. The programme data initially chosen will be displayed, and the machine will resume operation where it stopped. [. . . ]