User manual HOOVER HTC 9 AA

[. . . ] WASHING MACHINE HTC 9 AA H VGS p p C1 C2 C3 C4 A B C1 C2 C3 C4 G H p S V B A PROGRAMME/TEMPERATURE SELECTOR SPIN SPEED SELECTOR PRE-WASH EASY IRON SUPER FAST EXTRA RINSE DOOR LOCK LAMP START/STOP KEY CONTROL POSITION INDICATOR STOP/END OF CYCLE LAMP TIME REMAINING OR PROGRAMME PHASE LAMPS P R Table of programmes mod. setting speed ºC 160 150 90 90 90 90 85 85 80 80 25 9 4 70 50 50 50 150 160 44 30 40 30 15 30 30 40 40 40 400 800 800 800 800 800 800 800 1, 5 1, 0 1, 0 2, 0 2, 0 2, 0 3, 5 2, 0 90º 60º 40º 30º 15º 60º 50º 40º 30º 15º 900 900 900 900 900 800 800 800 800 800 800 900 programme whites COTTONS programme for * fast coloureds fast coloureds delicate coloureds delicate coloureds fast coloureds fast coloureds delicate coloureds delicate coloureds delicate coloureds rinse spin empty delicates woolmark woollens woolmark woollens hand wash 30º sport 30º AA 40 40º express 44 express 29 Máx. [. . . ] Intermediate spins during rinses are eliminated, the final spin is a gentle spin. To complete the wash cycle in the Delicates , Hand wash , AA40, Cotton, and Woollens programmes, press the Easy Iron key again: the machine will empty and perform the required spin. To empty machine of water with no spin, cancel the ongoing programme and select the Empty programme. C3 super fast key When this key is engaged programme times are cut by as much as 50 minutes, depending on the wash programme and temperature selected. The key can be activated only in Cottons, Synthetics and Mixed programmes. C4 extra rinse key The electronic system engaged by this key activates a new special rinse cycle. More water and a combination of drum rotation movements ensure that washing is perfectly rinsed. The key can be activated in Cottons, Mixed, Synthetics, Delicates, Rinse, Sportswear and AA40 programmes. 5. - Select spin speed if required (B) B spin selector Use this control to select the maximum spin speed within the range for the model of washing machine in question and the programme selected (see programme table). Spin speed may be selected at any time during the programme. 6. - Once you have selected the desired options, press the START key (H). [. . . ] When the programme is completed the Stop/End of cycle lamp (S) will come on and the time remaining or programme phase and Door Lock lamps (V and G) will go out. For your own safety, set the programme selector to OFF before opening the washingmachine lid and the drum doors to remove the washing. 07-04 / 46001669 / EN [. . . ]