User manual HOOVER HTC 120 AA

[. . . ] WASHING MACHINE HTC 120 AA HV G S p C1 C2 C3 C4 A B C1 C2 C3 C4 G H p S V B A PROGRAMME/TEMPERATURE SELECTOR SPIN SPEED SELECTOR PRE-WASH EASY IRON SUPER FAST EXTRA RINSE DOOR LOCK LAMP START/STOP KEY CONTROL POSITION INDICATOR STOP/END OF CYCLE LAMP TIME REMAINING LAMPS P R Table of programmes mod. ºC speed 160 150 90 90 90 90 85 85 80 80 25 9 4 70 50 50 50 150 160 44 30 40 30 15 30 30 40 40 40 400 800 800 800 800 1000 800 800 1, 5 1, 0 1, 0 2, 0 2, 0 2, 0 3, 5 2, 0 90º 60º 40º 30º 15º 60º 50º 40º 30º 15º 1200 1200 1200 1200 1200 800 800 800 800 800 800 1200 programme programme for 1. [. . . ] Intermediate spins during rinses are eliminated, the final spin is a gentle spin. Intermediate spins during rinses are eliminated and the machine stops before the final spin, which is a gentle spin. Intermediate spins during rinses are eliminated, the final spin is a gentle spin. To complete the wash cycle in the Delicates , Hand wash , AA40, Cotton, and Woollens programmes, press the Easy Iron key again: the machine will empty and perform the required spin. To empty machine of water with no spin, cancel the ongoing programme and select the Empty programme C3: super fast key When this key is engaged programme times are cut by as much as 50 minutes, depending on the wash programme and temperature selected. The key can be activated only in Cottons, Synthetics and Mixed programmes C4: extra rinse key The electronic system engaged by this key activates a new special rinse cycle. More water and a combination of drum rotation movements ensure that washing is perfectly rinsed. The key can be activated in Cottons, Mixed, Synthetics, Delicates, Rinse, Sportswear and AA40 programmes. 5. - Select spin speed if required (B) B spin selector Use this control to select the maximum spin speed within the range for the model of washing machine in question and the programme selected (see programme table). Spin speed may be selected at any time during the programme. 6. - Once you have selected the desired options, press the START key (H). [. . . ] When the programme is completed the Stop/End of cycle lamp (S) will come on and the Time Remaining and Door Lock lamps (V and G) will go out. For your own safety, set the programme selector to OFF before opening the washing-machine lid and the drum doors to remove the washing. 20-04-2005 / 46002013 / EN [. . . ]