User manual HOOVER HNT2135

[. . . ] · If the electric cable is damaged replace with an original set (cable and plug) supplied by the manufacturer or official after-sales service. The manufacturer accepts no responsibility for any damage to people or things resulting from the failure to comply with the appliance's installation and safety regulations. · Do not allow the appliance to be used by children or the infirm without due supervision. · Do not pull on the power cord or the appliance itself to remove the plug from the socket. [. . . ] - Press the key (H), the Time Remaining lamp will light up and the machine will continue with the programme. B. USING THE SELECTORS The various models may incorporate some or all of the following selectors. It is advisable to select the required options before pressing the Programme Start key (H). Remember that if the programme has already passed the stage at which an option is activated, that option will not be implemented. · TEMPERATURE SELECTOR Use this control to select the wash temperature within the range for the programme selected (see programme table). Select the required temperature before starting the programme. 10 · SPIN SELECTOR Use this control to select the maximum spin speed within the range for the model of washing machine in question and the programme selected (see programme table). · DELAYED START CONTROL The start of the programme set can be delayed so that the machine starts to wash after a set time. To do this, proceed as follows: - Turn the control to the desired timer setting (do not position it between settings). USING THE OPTION KEYS It is advisable to select the required options before pressing the Programme Start key (H). Remember that if the programme has already passed the stage at which an option is activated, that option will not be implemented. To cancel an option selected, just press the key again (the indicator lamp will go out). The various models may incorporate some or all of the following option keys: · EXTRA RINSE KEY The electronic system engaged by this key activates a new special rinse cycle. More water and a combination of drum rotation movements ensure that washing is perfectly rinsed. The key can be activated in Cottons, Mixed, Synthetics, Delicates, Rinse, Sportswear and AA40 programmes. · SUPER FAST KEY When this key is engaged programme times are cut by as much as 50 minutes, depending on the wash programme and temperature selected. The key can be activated only in Cottons, Synthetics and Mixed programmes. · EASY IRON KEY This function helps reduce creasing, depending on the programme selected and the type of fabric washed. Intermediate spins during rinses are eliminated and the machine stops before the final spin, which is a gentle spin. Intermediate spins during rinses are eliminated and the machine stops before the final spin. To complete the wash cycle in the Delicates, Woollens, Mix&Wash and Hand wash programmes, press the Easy Iron key again: the machine will empty and perform the required spin. SPECIAL HIGH-SPEED SPIN PROGRAMME Programme runs a spin at the speed indicated in the programme table. EMPTY ONLY Programme empties the water from the machine. SPECIAL PROGRAMMES HAND WASH The washing machine also has a delicate washing cycle called «hand wash». [. . . ] · Ensure that no item becomes trapped between the drum doors. LABEL SYMBOLS Labels are usually sown into the collar or side seams. The symbols which appear on them indicate the following: · Maximum WASH temperature. · Appropriate and inappropriate washing products. 17 The symbols are as follows: WASH Washing instructions always appear as a basin with different indications: · Do not wash. When the hand is half submerged in the water, this means that the item should be tumbled only gently during washing. [. . . ]