User manual HOOVER HNT 6414 CONTROL PANEL

[. . . ] time min. 160 155 115 110 105 95 90 85 75 70 60 55 50 25 9 4 50 195 155 44 29 30º 30º 40º 40º 40º 800 800 1000 800 800 2 2 2 3, 5 2 40º 30º 60º 50º 40º 30º programme White programme for *Fast coloureds max. espin speed rpm/min 1400 1400 1400 1400 1400 800 800 800 800 800 600 800 800 800 1400 max. load Kg. 6 6 6 6 6 2 2 2 2 2 1, 5 1 1 washing powder load I II option keys C COTTONS Fast coloureds & LINENS Delicate coloureds Delicate coloureds Fast coloureds MIXED SYNTHETICS DELICATES SPECIAL Fast coloureds Delicate coloureds Delicate coloureds Delicate coloureds Delicates Woollens Woollens Gentle rinse Gentle spin Empty Hand wash Sports AA 40 Fast 44 Fast 29 * Programme as per EN 60456 Technical data mod. [. . . ] To activate this option, always press the key before pressing the start key (H). C2 extra rinse key The electronic system engaged by this key activates a new special rinse cycle. More water and a combination of drum rotation movements ensure that washing is perfectly rinsed. The key can be activated in Cottons, Mixed, Synthetics, Delicates, Rinse, Sport and AA40 programmes. C3 super fast key When this key is engaged programme times are cut by as much as 50 minutes, depending on the wash programme and temperature selected. The key can be activated only in Cottons, Synthetics and Mixed programmes. 5. - Select spin speed if required (B1) B1 spin selector You can use this key to select final spin speed, but only within the range of speeds of the programme selected. 6. - Once you have selected the desired options, press the START key (H). The washing machine will start up and one of the time remaining lamps (V) will come on. This lamp indicates approximately how much time is left before the wash programme is completed: it will change as the programme progresses. Make sure that the stop/end of cycle lamp is flashing before pressing the start key (H). If it remains on continuously, turn the programme selector to OFF and re-set it to the desired programme. To cancel an option after setting, just press the option key again (the indicator lamp will go out). B2 delayed start key The washing machine can be set to start the programme selected 3, 6 or 9 hours after setting. To do this, proceed as follows: - Select the desired programme via the PROGRAMME SELECTOR. - Then press (H) to memorise the programme, which will start up after the time selected. - To cancel the programme timer, press the B2 key again until the End of Cycle lamp comes on. [. . . ] Programme Pause To pause the wash programme so that more washing can be added, proceed as follows: - Hold down the start key (H) until the option key lamps begin to flash and the time remaining lamp lights up. When the Door Lock lamp goes out (after approx. 2 minutes), open the door and put the additional washing into the drum. - Press the start key (H), the time remaining lamp will light up and the machine will continue with the programme. [. . . ]