User manual HOOVER F 5950

[. . . ] FILTER TANK REMOVAL: Lift it off the bottom tank by taking hold of it at the sides and disconnect it from the support provided (fig. It is important not to bend the dirty liquid hoses at an acute angle (fig. BOTTOM TANK REMOVAL: This can only be removed after taking off the top tank and filter unit. [. . . ] To secure the handle in the upright position, push the handle forward until the pedal locks, engaging the catch (fig. The machine needs at least one litre of solution in the tank to be able to start delivery. IMPORTANT: There are no user servicable components inside this appliance. aLL repairs MUST be carried out by HOOVER authorised service engineers. To reduce the risks of fire, electric shock and accidental damage caused by improper use: - Read the instructions for use of the appliance carefully before use and keep this instruction manual in a safe place. - The power socket for the power lead MUST have an earth connection to legal standards. - Disconnect the appliance after use and before any maintenance procedure. - Do not leave the appliance unattended when connected to the electrical mains or when switched on. - Do not pass the machine over the power lead when in operation, do not bend the lead at an acute angle, do not tread on it, do not apply loads of any kind. - Do not use the machine on surfaces on which flammable solids or liquids are present (such as hydrocarbons, ash, soot). Only use detergents recommended by Hoover specifically for use in Scrubber-dryer type machines. PRELIMINARY OPERATIONS: - Fill the machine with water and floor detergent. - Prepare the surface for cleaning by using a brush or vacuum cleaner to remove crumbs , hairs , soil , lumps of dust , etc. The machine will give its best performance on surfaces which have first been brushed, so they are ready for washing and drying. [. . . ] - Clean them under running water with the aid of a non-aggressive detergent and insert them in the guides, remembering to re-engage the end retainers. The warranty does not cover: - Parts subject to normal wear and tear (Brush, Belt, Hoses, Squeegee Blades, Paintwork). IMPORTANT: Switch off and remove plug from electrical supply before attempting any maintenance. [. . . ]