User manual HOOVER DXO H8A2TCEXS-S

[. . . ] We are proud to offer the ideal product for you and the best complete range of home appliances for your daily routine. Please read and follow these instructions carefully and operate the machine accordingly. This booklet provides important guidelines for safe use, installation, maintenance and some useful advice for best results when using your machine. Keep all documentation in a safe place for future reference or for any future owners. [. . . ] wARNING Always switch off and remove the plug from the electricity supply before cleaning this appliance. wARNING For electrical data refer to the rating label on the front of the dryer cabinet (with the door open). This appliance is equipped with Wi-Fi technology that allows you to control it remotely via App. The Hoover Wizard App is available for devices running both Android and iOS, both for tablets and for smartphones. Get all the details of the Wi-Fi functions by browsing the App in DEMO mode. L To exit REMOTE CONTROL mode while a cycle is underway, turn the programme selector to any position other than REMOTE CONTROL (Wi-Fi). L Open the App, create the user profile (or log-in if it is already created previously) and enroll the appliance following the instructions on the device display or the "Quick Guide" attached on the machine. L With the door closed, turn the programme selector to the REMOTE CONTROL (WiFi) position to control the appliance using the app once again. To enable it again, close the door, turn the programme selector to any position other than REMOTE CONTROL and then select it again. L Turn the programme selector to the REMOTE CONTROL (Wi-Fi) position: the controls on the control panel will be disabled. When the cycle has been completed, turn off the machine by turning the programme selector to the OFF position. Gently close the door pushing it slowly Until you hear the door 'click' shut. Turn the Programme Selector dial to select the required drying programme (see the table of programmes). If the door is opened during the programme to check the laundry, it is necessary to press programme start to recommence drying after the door has been closed. When the cycle is nearing completion the machine will enter the cool down phase, the clothes will be tumbled in cool air allowing the load to cool down. Following the completion of the cycle the drum will rotate intermittently to minimize creasing. This will continue until the machine is switched OFF or the door is opened. Do not open the door during the automatic programmes in order to obtain a proper drying. Power input / Power current fuse amp/ Supply voltage: see rating plate. Don't touch the buttons while inserting the plug because the machines calibrates the systems during the first seconds: touching the buttons, the machine couldn't work property. L To start the selected cycle with the preset parameters, press START/PAUSE. When the programme is running, the display will show the time to elapse. [. . . ] ANTI ODOURS The perfect cycle to remove the smells from the linens smoothing creases. REMOTE CONTROL (Wi-Fi) Position that you have to select when you want to enable / disable remote control through the App, via Wi-Fi. In this case, the start of cycle will take place through the App commands. Defects you can remedy yourself Before calling Service for technical advice please run through the following checklist. [. . . ]