User manual HOOVER 1300 SPIN

[. . . ] 40003764. qxd 26/08/2005 18:06 Page 1 Instruction Book ® 40003764. qxd 26/08/2005 18:06 Page 2 Contents Introduction. 32 2 40003764. qxd 26/08/2005 18:06 Page 3 Introduction Please read and follow these instructions carefully and operate the machine accordingly. This booklet provides important guidelines for safe use, installation, maintenance and some useful advice for best results when using your machine. Keep all documentation in a safe place for future reference or for any future owners. Check that no damage has occurred to the machine during transit. [. . . ] The amount of water in the wash is increased so that the detergent dissolves perfectly, ensuring an efficient cleaning action. The amount of water is also increased during the rinse procedure so as to remove all traces of detergent from the fibres. This function has been specifically designed for people with delicate and sensitive skin, for whom even a very small amount of detergent can cause irritation or allergy. You are advised to also use this function for children's clothing and for delicate fabrics in general, or when washing garments made of towelling, where the fibres tend to absorb a greater quantity of detergent. To ensure the best performance for your wash, this function is always activated on the Delicates and Woollens programs. Spin Speed Selector By adjusting the control knob it is possible to reduce the maximum spin speed of your selected programme to suit your needs and to help reduce any creasing of fabrics. Turn the spin speed selector knob until the indicator aligns with the required spin speed. The maximum spin speed will vary depending on the specification of the machine. 18 40003764. qxd 26/08/2005 18:08 Page 19 Crease Guard This option is only available on the Synthetics, Acrylics, Woolmark and Silk programmes. Programme Synthetics Acrylics Crease Guard function The programme is completed by a short spin of very low speed. The machine stops in the final rinse stage and the option indicators blink. The load is held in the water in the drum, thus reducing creasing and enabling easier ironing. The machine stops in the final rinse stage and the option indicators blink. The load is held in the water in the drum, thus reducing creasing and enabling easier ironing. The machine stops in the final rinse stage and the option indicators blink. The load is held in the water in the drum, thus reducing creasing and enabling easier ironing. Action required to complete the cycle To select a full spin cycle please turn the dial to the required spin programme. The machine will then pump out the water and the programme will conclude with a short spin. Finally, the programme carries out a brief tumbling action to loosen the items in the load. Press the Crease Guard button and the machine will pump out the water and complete the cycle with a short spin cycle. Woolmark Silk Press the Crease Guard button and the machine will pump out the water to complete the cycle. The load will not be spun and will therefore be very wet. Automatic Features Automatic Variable Capacity (Half Load) The washing machine is fitted with a self adjusting water level system. This system enables the machine to use the optimum amount of water needed to wash and rinse the laundry in relation to the particular load. This results in a reduction of the water and electricity used without in any way compromising the washing and rinsing performance. The amount of water and electricity used will always be appropriate for the clothes load. The washing machine automatically ensures excellent washing results at minimum cost whilst respecting the environment. Out of Balance protection This model is fitted with an electronic sensor device that checks if the load is balanced correctly. If the load is slightly unbalanced the machine will re-balance it automatically to then carry out the normal spin. [. . . ] Carrying out more rinse cycles does not serve any purpose in such cases. 29 40003764. qxd 26/08/2005 18:09 Page 30 Power Failure If there is a power failure the wash cycle will be interrupted, and the wash programme and functions will be suspended. When the power is restored, the wash programme and functions will re-start from the same point and complete the programme. During a power failure the water can be drained and the load can be removed from the machine as follows: 1. Switch off the machine both via the programme knob and the mains power supply. [. . . ]