User manual HONEYWELL TS 130

[. . . ] Note that the appliance is exclusively for use in the applications detailed in these installation instructions. [. . . ] Please take note that any assembly, commissioning, servicing and adjustment work may only be carried out by authorized persons. Heated potable water then flows out and this is replaced by cold water from the supply network. This absorbs excess heat from the heat generator and prevents overheating. Application Multi-fuel boilers with integral water heating or condensing coils in closed solid-fuel fired heating systems to EN 12828. Maintenance We recommend a planned maintenance contract with an installation company 8. 1 Inspection and Maintenance · According to the requirements of DIN EN 12828, the system operator is obliged to have the thermal discharge safety valve checked by a professional at least once a year to ensure its functioning capacity. Check whether water is escaping from the housing - if water is escaping, the seals (piston guide complete) must be replaced or if necessary the unit must be replaced 2. Operate the check valve and first check if water is running off, then close the valve again - if no water is escaping or the valve does not close, the unit may have to be replaced To be carried out by an installation company · To be carried out by the operator Do not use any cleaning agents containing solvents or alcohol to clean the plastic parts! [. . . ] Detergents must not be allowed to enter the environment or the sewerage system! [. . . ]