User manual HONEYWELL THERAFIX

[. . . ] :, 7+ 759 , 16(57 352'8&7 '$7$ 9 9 7KHUDIL[ $SSOLFDWLRQ The Therafix is used to connect compact radiators or uinversal radiators (6-point radiators) with 50 mm connection distance to one- or two-pipe hydronic heating systems. [. . . ] When the temperature decreases the sensor contracts and the spring-loaded thermostatic insert opens again ­ more heating water can flow through the radiator. The radiator is pre-set, drained or shut-off over the lockshield insert integrated into the return of the valve. Pre-setting allows throttling the flow through a radiator to realize a hydronic balance and is done with a 4 mm Allan key. The draining function allows draining of the radiator over the Therafix. A special draining adapter is required, please refer to `Accessories' further below. The riser tube inside the radiator is also drained during the draining process. The shut-off function separates the radiator from the heating loop, e. g. Therafix angle (wall) NOTE: All dimensions in mm unless otherwise stated. Fig. [. . . ] When another radiator with a different kv-value is used the total kv-value and the radiator share can change. Honeywell AG · All rights reserved 5 EN0H-0172GE25 R1001 THERAFIX Home and Building Control Honeywell AG Zu den Ruhrwiesen 3 D-59755 Arnsberg-Neheim EN0H-0172GE25 R1001 Phone: (49) 2932 9880 Fax: (49) 2932 988239 mng@honeywell. com 6 http://europe. hbc. honeywell. com Subject to change · All rights reserved [. . . ]