User manual HONEYWELL TH5220D

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HONEYWELL TH5220D. We hope that this HONEYWELL TH5220D user guide will be useful to you.


HONEYWELL TH5220D : Download the complete user guide (299 Ko)

Manual abstract: user guide HONEYWELL TH5220D

Detailed instructions for use are in the User's Guide.

[. . . ] To prevent possible compressor damage, do not operate cooling system when outdoor temperature is below 50°F (10°C). 1 Operating Manual About your new thermostat Congratulations on the purchase of your new Honeywell thermostat. It has been designed to give you many years of reliable service and easy-to-use, push-button climate control. Features · · · · · One-touch temperature control. [. . . ] The 3-degree separation between heating and cooling set temperatures is fixed, and cannot be changed. 8 Press until screen displays "Auto" Note: The Auto system setting may not appear, depending on how your thermostat was installed. FocusPROTM TH5220D Non-programmable Digital Thermostat Built-in compressor protection Inside 75 Fan Auto ° Cool On System Cool Setting 75 Cool ° This feature helps prevent damage to the compressor in your air conditioning or heat pump system. Damage can occur if the compressor is restarted too soon after shutdown. This feature forces the compressor to wait for a few minutes before restarting. During the wait time, the display will flash the message Cool On (or Heat On if you have a heat pump). When the safe wait time has elapsed, the message stops flashing and the compressor turns on. Message flashes until safe restart time has elapsed 9 Operating Manual Battery replacement Press and pull to remove Replace Battery Insert fresh AA alkaline batteries, then reinstall battery holder Batteries are optional (to provide backup power) if your thermostat was wired to run on AC power when installed. Install fresh batteries immediately when the REPLACE BATTERY warning begins flashing. The warning flashes about two months before the batteries are depleted. Even if the warning does not appear, you should replace batteries once a year, or before leaving home for more than a month. Batteries provide backup power to the display during power interruptions. All other settings are permanently stored in memory, and do not require battery power. 10 FocusPROTM TH5220D Non-programmable Digital Thermostat In case of difficulty If you have difficulty with your thermostat, please try the suggestions below. Most problems can be corrected quickly and easily. Display is blank · · · · Check circuit breaker and reset if necessary. If thermostat is battery powered, make sure fresh AA alkaline batteries are correctly installed (see page 10). Temperature settings do not change Make sure heating and cooling temperatures are set to acceptable ranges: · Heat: 40° to 90°F (4. 5° to 32°C). · Cool: 50° to 99°F (10° to 37°C). 11 Operating Manual In case of difficulty Heating or · Press SYSTEM button to set system to Heat. Make sure the temperature cooling system is set higher than the Inside temperature. · · · · "Cool On" or "Heat On" is flashing · Check circuit breaker and reset if necessary. Wait 5 minutes for the system to restart safely, without damage to the compressor (see page 9). 12 FocusPROTM TH5220D Non-programmable Digital Thermostat Customer assistance For assistance with this product, please visit www. honeywell. com/yourhome. Or call Honeywell Customer Care toll-free at 1-800-468-1502. Model number xxxxxxx Date code xxxxxxx To save time, please remove the battery holder and note your model number and date code before calling. Accessories/replacement parts To order, please call Honeywell Customer Care toll-free at 1-800-468-1502. Battery holder. . . . . . . . . . . . . . . . . . . . . . Part No. 50002883-001 (Use to cover marks left by old thermostats. ) 13 Operating Manual Limited 5-year warranty Honeywell warrants this product, excluding battery, to be free from defects in the workmanship or materials, under normal use and service, for a period of five (5) years from the date of purchase by the consumer. [. . . ] This warranty gives you specific legal rights, and you may have other rights which vary from state to state. If you have any questions concerning this warranty, please write Honeywell Customer Relations, 1985 Douglas Dr, Golden Valley, MN 55422 or call 1-800-4681502. In Canada, write Retail Products ON15-02H, Honeywell Limited/ Honeywell Limitée, 35 Dynamic Drive, Scarborough, Ontario M1V4Z9. 16 Automation and Control Solutions Honeywell International Inc. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HONEYWELL TH5220D




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HONEYWELL TH5220D will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.