User manual HONEYWELL T8700C

[. . . ] T8700C An Electronic RoundTM Programmable Thermostat OWNER'S GUIDE 1 69-1099 69-1099 Congratulations on the purchase of your new thermostat! [. . . ] To change to the cooling program, move the System switch to the COOL position and enter the cooling temperature settings. To change the preprogrammed time/temperature settings, follow steps 2 through 6. If not, press the key until End is displayed or the thermostat will automatically return to normal operational mode within five minutes. 5 Press or to set desired WAKE temperature. 69-1099 4. End is displayed for five seconds indicating PM the end of programming. The thermostat then displays current time and room temperature. Press or to set desired SLEEP temperature. 6 69-1099 OPERATING YOUR THERMOSTAT Display Temperature Setting. Press or once SET to display present PM temperature setting. After approximately five seconds the thermostat displays current time/temperature. The TEMPORARY change is TEMPORARY AM in effect until the next program period. To cancel your TEMPORARY change, press until End is displayed. Hold Function. To hold the thermostat at one temperature indefinitely, program both WAKE and SLEEP to the same temperature. Temporary Change. a. Press SET or until desired temperature is displayed. PM 7 69-1099 ENERGY SAVINGS You can save energy with this thermostat during the heating season by automatically lowering the temperature setting 5°F (3°C) to 10°F (5°C) at night. [. . . ] Copyright ©1997 Honeywell Inc. Home and Building Control Honeywell Limited-Honeywell Limitée 155 Gordon Baker Road North York, Ontario M2H 3N7 Helping You Control Your World® All Rights Reserved 12 ® U. S. [. . . ]