User manual HONEYWELL SLF3
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HONEYWELL SLF3. We hope that this HONEYWELL SLF3 user guide will be useful to you.
 |
Manual abstract: user guide HONEYWELL SLF3
Detailed instructions for use are in the User's Guide.
[. . . ] The airflow sensor contains a sensor element which is sensitive to mechanical loading and wich must not be touched with hard and pointed objects. [. . . ] The sensor must be connected with the evaluation unit corresponding to the adjacted connection diagram. The terminals of the sensor must be connected with the terminals of the evaluation unit (see connection diagram). 5 mm) If the probe cable is run together with other cables use shielded cable. A2 = brown b2 = black a3 = blue Turn , , Sensitivity" towards Maximum (+) until the yellow LED switches on and the output relay will switch. While the plant is being started up (still no airflow present), the output contact is activated and the flow condition singalled. the time for the switch-on bypass is adjustable on the potentiometer from 2-60 s. [. . . ] Setting elements: s = Sensitivity (High sensitivity (+) for low switching point / low flow speed) t = time for switch-on bypass (2-60s) Signallamps (LEDs) 1 = Flow present or switch-on bypass active 2 = Supply voltage present [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HONEYWELL SLF3
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HONEYWELL SLF3 will begin.