User manual HONEYWELL S6040A1003

[. . . ] Air FLOW SWITCHES FEATURES · · Cost-effective flow switches for HVAC applications. [. . . ] The device must be mounted with the seal plate (included in the package) through an approx. The device must be fixed with two screws (included in the package. ) The paddle must then be mounted with a screw on the shaft inside of the duct. To adjust the device to other levels, turn the adjustment screw clockwise. Because of the risk of breakage at air speeds greater than 5 m/s, when installed in ducts in which high air speeds are expected, the paddle must be cut off along the two markings. When the paddle is narrowed in this way, the minimum switch point is increased from 1 m/s to 2. 5 m/s. DIMENSIONS 135 mm 70 mm 113 mm 65 mm 1. 5 mm 265. 5 mm 50 mm 80 mm NOTES: 1) THE MIN. IT CHANGES TO 2. 5 M/S WHEN THE PADDLE IS COMPLETELY CUT OFF ALONG BOTH LINES. 2) IF THE ADJUSTMENT SCREW IS SET TO MORE THAN 5 M/S, THE PADDLE MUST BE COMPLETELY CUT OFF ALONG BOTH LINES. Fig. 9. 2 m/s; reset point: 8. 0 m/s. FIELD WIRING COMMON RED NORMALLY OPEN BLUE NORMALLY CLOSED WHITE ADJUSTMENT SCREW FOR FLOW RATE Fig. [. . . ] La Pièce 16, Switzerland by its Authorized Representative: Automation and Control Solutions Honeywell GmbH Böblinger Strasse 17 71101 Schönaich Germany Phone: (49) 7031 63701 Fax: (49) 7031 637493 http://ecc. emea. honeywell. com Subject to change without notice. [. . . ]