User manual HONEYWELL S245B

[. . . ] Install the safety valve in such a way that during venting no harm can occur to persons or objects adjacent to the unit. [. . . ] Screw the valve in tight using a suitable wrench and avoid damaging the valve. If the installation is taken out of service for a long period, then the unit should be returned to the venting position. Ensure dirt does not build up around the discharge area of the safety valve. The intervals for function checks of the safety valves must be fixed by the operator of the installation under consideration of the local requirements for pressure tanks (at least once a year according to the recommendation of the manufacturer). The facility operator should ensure that the function tests are carried out regularly by an authorized person. Adjustment of pressure setting and repair operations may only be carried out by the manufacturer. [. . . ] Manufactured for and on behalf of the Environment and Combustion Controls Division of Honeywell Technologies Sàrl, Ecublens, Route du Bois 37, Switzerland by its Authorised Representative Honeywell GmbH MU1H-1309GE23 R1005 Subject to change without notice © 2005 Honeywell GmbH [. . . ]