User manual HONEYWELL MINIPLUS FF06

[. . . ] Use the appliance according to its intended use in good condition with due regard to safety and risk of danger. [. . . ] Installation position Operating pressure Horizontal with filter bowl downwards FF06-AA, FF06EA max. The rinse water must be piped to the drain in such a way that no back pressure can oc-cur 1. Discharge into floor drain Filter size Reverse rinsing quantity* C (mm) 1/2" - 1 1/4" 25 litres 20 *at 4, 0 bar inlet pressure and a rinse duration of 15 seconds We recommend a planned maintenance contract with an installation company In accordance with DIN 1988, part 8, the following measures must be taken: 1 Rinse filter Frequency: at least every 2 month (depending on local operating conditions · Non-compliance can lead to the filter becoming blocked This results in a drop in pressure and decreasing water flow · the filter meshes are made of stainless steel. A red coating as a consequence of rust from the pipelines has no influence on function or the way the filter works To be carried out by an installation company or the operator. With clear filter bowl, threaded male connections, filter mesh size 100 µm FF06-. EA = with clear filter bowl, without connections, filter mesh size 100 µm FF06-. AAM = with brass filter bowl, threaded male connections, filter mesh size 100 µm FF06-. GB If rinsing is into a container, then a suitable container must first be put underneath. [. . . ] N° Désignation 1 Tasse filtrante transparente 1/2" complète, avec tamis 3/4" - 11/4" et support 2 Jeu de joints toriques pour 1/2" 3/4" - 11/4" support (10 pièces) 1/2" 3 Tamis de rechange 3/4" - 11/4" 4 Jeu de joints toriques 1/2" pour tasse filtrante 3/4" - 11/4" (10 pièces) Honeywell GmbH [. . . ]