User manual HONEYWELL HAV 32

[. . . ] Hometronic ball valve HAV 20, 25, 32 Mounting and operation Application Application The motor-driven Hometronic ball valve HAV opens or closes drinking water conduits by means of a ball valve. [. . . ] DIN 1988. Selecting the mounting site Depending on the mounting site selected, the ball valve can be used to control the water supply of an entire house or of an individual apartment. 1. Ball valve Mounting The ball valve can impair the function of sprinkler systems or similar water-based extinguishing systems. Before mounting the module check whether an extinguishing system is installed or is to be installed. If appropriate, select a different mounting site. Caution! Loosen the 2 screws M 6x15 (3) on the bottom of the drive (1). Lift the drive off the valve (2). Install the ball valve at the corresponding plumbing by using a suitable tool (openended spanner). Mount the device switch HS 30 as described in the mounting and operating instructions of the device switch. Ensure that the cable has the right length! Electrical connection Install an all-pole switch with 3 mm opening on site in the incoming line. Wire the device switch and ball valve in accordance with the adjacent diagram and connect them to the power supply. Mounting Assembling the ball valve When selecting the mounting site ensure that: · The ball valve is accessible and operable when power fails. [. . . ] HAV 20 HAV 25 HAV 32 G ¾" 1" 1¼" KVS 41 68 123 PN 16 16 16 A 144 153 163 B 124. 5 129. 5 134. 5 C 19. 5 23. 5 28. 5 D 90. 5 104 119. 5 E 77. 5 90 105. 5 H 84 93 103 All dimensions in mm, KVS in m3/h Honeywell AG Böblinger Straße 17 D ­ 71101 Schönaich Telephone ++49 (0) 7031 637-300 The right is reserved to make This company is certified to modifications This document is definitive for the enclosed product and replaces all previous publications. [. . . ]