User manual HONEYWELL DPTM50D-5000D

[. . . ] 3-WIRE DIFFERENTIAL PRESSURE TRANSMITTERS WITH DIGITAL DISPLAY AND CURRENT/VOLTAGE OUTPUT SPECIFICATION DATA & MOUNTING INSTRUCTIONS DPTM50D-5000D FEATURES · · · · · · · · · · · Monitoring gaseous, non-aggressive media Piezo-resistive pressure transducer Up to 40 kPa (60 kPa) overload capacity Rugged design; protection class IP54 Easy installation and wiring connection Measurement range adjustable by jumper Response time adjustable by jumper Output signal adjustable by jumper Red digital display Display of values > +1000 Pa in kPa Re-zeroing possible by pushbutton NOTE: These sensors are not suitable for use in installations under periodic inspection by the U. S. [. . . ] The pressure to be measured is applied to and thus deflects a thin membrane made of mono-silicon. The membrane's semiconductor resistors (arranged to simultaneously compensate for the temperature response) detect this mechanical deflection and generate an electrical output signal. The output signal is converted into the 0. . . 10 V or 4. . . 20 mA analog signal which changes (within the specified error limits) in proportion to the applied pressure and is shown in the LED display. This can be changed (except for +/- models) to pressure range 2 by removing the corresponding jumper (see Fig. This can be changed to 100 ms by removing the corresponding jumper (see Fig. NOTE: The devices are factory pre-set to an output signal of 0. . . 10 V. This can be changed to 4. . . 20 mA by removing the corresponding jumper (see Fig. Mounting WIRING PRESSURE RANGE jumper inserted = pressure range 1 jumper removed = pressure range 2 RESPONSE TIME jumper inserted = 1 sec jumper removed = 100 msec ACCESSORIES DPSK: Included in delivery. [. . . ] Box 1254 71099 Schönaich Germany phone: (49) 7031-637-02 fax: (49) 7031-637-850 http://www. honeywell. de/fema Subject to change without notice. [. . . ]