User manual HONEYWELL ALWA-KOMBI-4

[. . . ] According to its intended use · in good condition · With due regard to safety and risk of danger. [. . . ] Please take note that any assembly, commissioning, servicing and adjustment work may only be carried out by authorized persons. This is achieved either by manually closing the valve to a certain position or automatically, when the valve is equipped with a thermal actuator. Valve housing in straight pattern with internal threads to ISO 7 (DIN 2999) or external threads according to DIN ISO 228 · Set the calculated value by turning the setting wheel to the left or to the right. Take the scale value from the knurling on the temperature controlled actuator and set on the valve as described under 5. To be carried out by an installation company · To be carried out by the operator Detergents must not be allowed to enter the environment or the sewerage system!Flush out dirt Drain taper does not close · 1 Connections for external threads Sanpress/Profipress System connection set (red Union nut, sealing and red bronze soldering tailbronze) piece DN 15, for 15 mm pipe- VA7404A015 DN 15, for 15 mm pipe-Ø VA7400A015 DN 15, for 18 mm pipe- VA7404A018 DN 15, for 16 mm pipe-Ø VA7400A016 DN 20, for 22 mm pipe- VA7404A020 DN 20, for 18 mm pipe-Ø VA7400A018 DN 25, for 28 mm pipe- VA7404A025 DN 20, for 22 mm pipe-Ø VA7400A020 DN 32, for 35 mm pipe- VA7404A032 DN 25, for 28 mm pipe-Ø VA7400A025 DN 40, for 42 mm pipe- VA7404A040 DN 32, for 35 mm pipe-Ø VA7400A032 Union nut, sealing and internally threades red DN 40, for 42 mm pipe-Ø VA7400A040 bronze tailpiece Union nut, sealing and externally threaded red bronze tailpiece for external threads DN 15 VA7401A015 DN 20 VA7401A020 DN 25 VA7401A025 DN 32 VA7401A032 DN 40 VA7401A040 DN 50 VA7401A050 DN 65 VA7401A065 DN 80 VA7401A080 MAPRESS stainless steel compression-fitting with sealing DN 15, for 15 mm pipe-VA7403A015 DN 15, for 18 mm pipe-VA7403A018 DN 20, for 22 mm pipe-VA7403A020 DN 25, for 28 mm pipe-VA7403A025 DN 32, for 35 mm pipe-VA7403A032 DN 40, for 42 mm pipe-VA7403A040 DN 50, for 54 mm pipe-VA7403A050 DN 65, for 64 mm pipe-VA7403A065 DN 65, for 76 mm pipe-VA7403A076 DN 80, for 89 mm pipe-VA7403A080 Draining adapter for all types and sizes VA2400A001) with pre-setting between 1. [. . . ] Sampling valve for all sizes VA3400C001 only in conjunction with drain adapter VA3400A001 [. . . ]