User manual HILTI TE15

[. . . ] Don't force small tool or attachment to do the job of a heavy-duty tool. Don't use tool for purpose not intended ­ for example ­ d'ont use circular saw for cutting tree limbs or logs. Rubber gloves and non-skid footwear are recommended when working outdoors. [. . . ] Only use accessories and attachments which are given in the operating instructions or in the respective catalogue. The use of accessories or insert tools or attachments other than those specified in the operating instructions can result in personal injury to you. This electric tool/machine complies with respective safety regulations. Repairs may only be carried out by an electrical specialist otherwise an accident hazard for the operator can exist. Always use any supplied side handle, and keep it tightly secured; use both hands during operation. Exposed metal surfaces may be made live if the tool drills into electrical wiring. To reduce the risk of electric shock, this equipment has a polarized plug (one blade is wider than the other). If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way. Please read and take note of these precautions before you use the tool/machine and keep these safety precautions in a safe place! Not recommended 17. When tool is used outdoors, use only extension cords intended for use outdoors and so marked. Before further use of the tool, a SAVE THESE INSTRUCTIONS Hilti TE 15 Rotary Hammer Drill Technical data Input power: 650 W Voltage (versions): 115 V, 230 V, Input current: 6. 3 A, 2. 9 A Frequency: 50­60 Hz Speed under load: 0­700 r. p. m. Single impact energy: 2. 2 Joule / 1. 6 ft-lb Drill bit size range: 5­25 mm / 3/16­1 dia. Optimal performance dia. : 10­16 mm / 3/8­5/8 Drilling performance in medium-grade ^ concrete with 12 mm / 1/2 dia. Chuck type: TE-C Drill bit connection end: TE-C Automatic cut-out brushes Double insulation, class II With slip clutch Dust-tight enclosure, central and permanent lubrication (maintenance free) Variable speed switch Side handle adjustable with depth gauge Always wear ear protectors. Always wear safety Double insulation glasses. This Product is UL listed and CSA certified R Before starting to work, please read the enclosed safety precautions. Right of technical modifications reserved. 1 Please note before start-up: 1. The electric supply must be the same as given on the machine nameplate. [. . . ] 4: Changing the chuck Pull forward sleeve and completely remove chuck. Note: On attaching a keyless chuck, the hammering action is automatically cut out i. 5: Side handle/depth gauge Unscrew side handle to release depth gauge. [. . . ]