User manual HILTI TE104

[. . . ] Applicable only to Class II tools. 3. 3 Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded. [. . . ] Such preventive safety measures reduce the risk of starting the tool accidentally. 5. 5 Store idle tools out of reach of children and other untrained persons. Properly maintained tools with sharp cutting edges are less likely to bind and are easier to control. 5. 7 Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the tools operation. 5. 8 Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool. Service 6. 1 Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of electric shock or injury. Additional Specific Safety Rules: 101 Hold tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a «live» wire will make exposed metal parts of the tool «live» and shock the operator. Prolonged exposure to high intensity noise can cause hearing loss. Hilti TE104 Scaler Technical data Input power: Voltage: Input current: Frequency: Machine weight: Dimensions: Hammering under load: Single impact energy: Front section designed to be held Permanent lubrication Variable speed control switch Automatic cut-out brushes Quick-release chuck for set of scaling needles Quick-release chuck: Chisel blade adjustment to 8 positions Chisels with extended TE-C connection end: 550 W 115 V 4. 8 A, 50­60 Hz 3. 5 kg (7. 7 lbs) 365 × 190 × 85 (14. 4 × 7. 5 × 3. 3) 0­3800 blows/min. 2. 2 Joules Double insulation Kit supplied with the machine: Plastic case, cleaning cloth, Hilti connection end grease, operating instructions for TE-C chisels This Product is UL listed and CSA certified R Pointed, narrow, flat, wide flat/scraper, flexible, channel, mortar and joint chisels Needle protector with round and oval opening for the sets of needles Double insulation construction, class II Right of technical modifications reserved Always wear ear protectors. Always wear protective gloves. Always wear safety glasses. Please note before starting to work Read the enclosed General Safety rules. Do not use this product in any way other than as directed by these operating instructions. [. . . ] (Make sure the tool is always in contact with the base material. ) Pointed and narrow flat chisels: Forge chisels at about 900°C to 1000°C (bright red to vright yellow red). On forging and quenching the chisel in this way, it will be given optimal treatment. [. . . ]