User manual HILTI SI 100

[. . . ] Testing new discs Allow the machine to run for one minute under no load. Fire risk Ensure that no flammable materials are located within a wide area of where sparks fly when cutting and grinding metal. [. . . ] Fire risk Ensure that no flammable materials are located within a wide area of where sparks fly when cutting and grinding metal. The starting curent required by the machine is several times higher than the nominal cunent inout. The starting cunent regulator limits the current drawn by the machine when starting, helping prevent the mains fuse from tripping. The constant-speed electronic control system keeps the running speed almost constant under load or no-load conditions. This oermits materials to be oround or cut optimally as a result of the constant disc speed. Send tool and/or related parts immediately upon discovery of the defect to the address of the local Hilii marketing organizjtion Or consequential damages, losses or expenses in connection irvitr, or bv reasolr oJ, the _use of, or inability to use the tool for any purpos6. Means that only original Hilti consumables, componerits and spare parts may be used in the tool. This wananty provides the free-of-charge repbir or replacement of defective parts only. Parts requiring repair or replacemint ds a resuli of normal wear and tear are not covered by this wananty. Operati, ng Instructions, all wananty claims bre made within 12 months from the This constitutes Hilti's entire obligation with regard to wananty and supersedes conceming warranties. [. . . ] This wananty provides the free-of-charge repbir or replacement of defective parts only. Parts requiring repair or replacemint ds a resuli of normal wear and tear are not covered by this wananty. [. . . ]