User manual HILTI SFL 144-A

[. . . ] Type: Generation: 01 en Symbols Read the operating instructions before use. Volts Return waste material for recycling. Serial no. : 2. Description 2. 1 Use of the product as directed The appliance is designed to be used as a source of light on construction sites. The appliance is manufactured from high-grade, impact-resistant plastic. [. . . ] Read the operating instructions for the charger for further information about the charging procedure. Li-ion batteries are ready for use at any time, even when only partly charged. Charging progress is indicated by the LED display (see charger operating instructions). 6. 3 Fitting the battery 2 3 CAUTION Check that the appliance is switched off before fitting the battery. CAUTION Before inserting the battery in the tool or appliance, check that the terminals of the battery and the tool or appliance are free from foreign objects. Push the battery into the appliance from below as far as it will go, until it is heard to engage with a double click. CAUTION A falling battery may present a risk of injury to yourself or others. Pull the battery out of the appliance from below. 6. 1 Battery use and care NOTE Battery performance drops at low temperatures. Never store the battery where it is exposed to direct sunlight or sources of heat, e. g. Batteries that have reached the end of their life must be disposed of safely and correctly to avoid environmental pollution. 6. 2 Charging the battery DANGER Use only the Hilti batteries and Hilti chargers listed under "Accessories". 6. 2. 1 Charging a new battery for the first time Charge the battery fully before using it for the first time. 12 7. Operation CAUTION The front part of the appliance can become very hot. when the reflector is covered by an object, the lamp switches itself off automatically. NOTE The lamp switches itself off automatically when the battery is exhausted. Please check the battery's state of charge before using the lamp. 7. 1 Switching on / off To switch on, slide the on / off switch to the "1" position. To switch off, slide the on / off switch to the "0" position. [. . . ] Remedy Have the battery condition checked by Hilti or replace the battery. Disposal CAUTION Improper disposal of the equipment may have serious consequences: The burning of plastic components generates toxic fumes which may present a health hazard. In particular, Hilti is not obligated for direct, indirect, incidental or consequential damages, losses or expenses in connection with, or by reason of, the use of, or inability to use the tool for any purpose. [. . . ]