User manual HILTI SF144-A

[. . . ] SF 144-A / SFH 144-A Bedienungsanleitung Operating instructions Mode d'emploi Manual de instrucciones Istruzioni d'uso Gebruiksaanwijzing Brugsanvisning Bruksanvisning Bruksanvisning Käyttöohje Manual de instruções Lietoßanas pamåcîba Instrukcija Kasutusjuhend de en fr es it nl da no sv fi pt el lv lt et 1 1 2 3 6 5 7 4 9 8 + 2 14. 4 Volt Li-Ion 2. 6 Ah 3 L R 4 2 5 1 3 1 6 7 1 2 3 14. 4 Volt Li-Ion 2. 6 Ah SF 144A / SFH 144A cordless drill/driver / cordless hammer drill/driver It is essential that the operating instructions are read before the power tool is operated for the first time. Always keep these operating instructions together with the power tool. Ensure that the operating instructions are with the power tool when it is given to other persons. Contents 1. EC declaration of conformity Page 15 16 17 18 19 22 22 24 25 26 26 27 Operating controls and parts 1 @ Quick-release chuck ; Torque and operating mode setting ring = Side handle % Control switch (with electronic speed control) & Forward / reverse switch ( Motor brake ) Two- or three-speed gear selector switch + Type identification plate § Grip / Battery release button (2 buttons) en 1. [. . . ] Li-ion batteries are ready for use at any time, even when only partly charged. Charging progress is indicated by the LED display (see charger operating instructions). 6. 3 Fitting the battery CAUTION Before fitting the battery, check that the power tool is switched off and that the transport lock is engaged (forward/reverse switch in the middle position). CAUTION Check that the terminals on the battery and in the power tool are free from foreign objects before inserting the battery in the power tool. Push the battery into the power tool from below as far as it will go and until it is heard to engage with a click. CAUTION A falling battery may present a risk of injury to yourself or others. Pull the battery downwards out of the power tool. en 6. 1 Battery use and care NOTE Battery performance drops at low temperatures. Change to the second battery as soon as a drop in performance is noticed. Never store the battery where it is exposed to direct sunlight or sources of heat, e. g. Batteries that have reached the end of their life must be disposed of safely and correctly to avoid environmental pollution. 6. 2 Charging the battery DANGER Use only the Hilti batteries and Hilti chargers listed under "Accessories". 6. 2. 1 Charging a new battery for the first time A new battery must be charged correctly for the first time before use. Incorrect initial charging may have a permanent, negative effect on battery capacity. Please refer to the applicable battery charger's operating instructions for information about initial charging. 7. Operation CAUTION The power tool may suddenly swing to the side (rotate about its own axis) when drilling, hammer drilling or screwdriving. Always use the power tool with the side handle fitted and hold it securely with both hands. CAUTION The tool may get hot during use. Wear protective gloves. 22 CAUTION To avoid injuries caused by the insert tool, wear protective gloves when changing insert tools. 7. 1 Setting forward or reverse rotation 3 NOTE The forward / reverse switch is used to select the direction of rotation of the drive spindle. The control switch is locked when the forward / reverse switch is in the middle position. Push the forward / reverse switch to the right (power tool held in working direction) to select forward rotation. Push the forward / reverse switch to the left (power tool held in working direction) to select reverse rotation. Release the side handle clamping band by turning the handle counterclockwise. [. . . ] The battery doesn't engage with an audible click. The power tool or the battery gets very warm. Electrical fault. The power tool has been overloaded (application limits exceeded). 25 10. Disposal CAUTION Improper disposal of the equipment may have serious consequences: The burning of plastic components generates toxic fumes which may present a health hazard. Batteries may explode if damaged or exposed to very high temperatures, causing poisoning, burns, acid burns or environmental pollution. Careless disposal may permit unauthorized and improper use of the equipment. [. . . ]