User manual HILTI CP 657 INSTALLATION
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HILTI CP 657. We hope that this HILTI CP 657 user guide will be useful to you.
 |
HILTI CP 657 INSTALLATION: Download the complete user guide (100 Ko) |
Manual abstract: user guide HILTI CP 657INSTALLATION
Detailed instructions for use are in the User's Guide.
[. . . ] Penetration and penetration supporting structures must be installed in compliance with local building and electrical standards. [. . . ] For maintenance reasons, a penetration seal could be permanently marked with an identification plate. In such a case, mark the identification plate and fasten it in a visible position next to the seal. Re-installing cables or other penetrations · Remove or cut the block from the seal. · Install the penetrant and re-lay the block in compliance with the approval. Single cables can be run through joints between blocks or a hole can be drilled through a block using a sharpened piece of metal pipe or tubing.
Notice about approvals · When making a cable seal using Hilti FS 657 Intumescent FIREBLOCK, national approvals must be observed. Please refer to the UL Directory or the Hilti Firestop Manual for restrictions as to opening size, type and thickness of wall or floor, maximum cable diameter, etc. [. . . ] Storage · Store only in the original packaging in a location protected from moisture and direct sunlight. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HILTI CP 657
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HILTI CP 657 will begin.