User manual HILTI CA3400 INSTALLATION

[. . . ] 7. 2. 4. 3 INSTALLATION DATA Basic Use CA3400 provides outstanding adhesive capabilities bonding securely to wood, plywood, hardboard, fiberboard, concrete, masonry, stone, tile marble, acoustical material, polyurethane foam and most other common building materials. [. . . ] When installing CA3400 for glued APA floor systems, apply per the American Plywood Association specifications. Cleaning Tools and excess adhesive should be cleaned with mineral spirits. 7. 2. 4. 4 INSTALLATION INSTRUCTIONS Surface Preparation All surfaces should be clean and free from all contaminants such as oil and grease. Joist covered with ice, water, saw dust, snow, mud or other foreign materials should be cleaned prior to application. Installation Place adhesive cartridge into standard one quart dispenser, then cut the tip of cartridge nozzle at a slant to desired bead diameter. Puncture inner seal with nail or wire and apply adhesive in a continuous bead. Apply only as much CA3400 Subfloor Adhesive as can be covered within 20 minutes, and use a 1/4" zig zag bead when laminating underlayment to joists. [. . . ] For best results, adhesive should be kept at room temperature for 24 hours prior to use when temperatures are below 40°F, for easier extrusion from the tube. 7. 2. 4. 5 ORDERING INFORMATION Description Tube (29 fl oz) Case of 12 tubes Pallet of 240 tubes Item No. [. . . ]