User manual HERKULES OFC1

[. . . ] 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] One oil filter capacity. Page 4 of 8 OWNER/OPERATOR RESPONSIBILITY It is the responsibility of the owner/operator to properly use and maintain this equipment. The instructions and warnings contained in this manual shall be read and understood by the owner/operator prior to operating this equipment. If an owner/operator does not understand English, the contents of this manual shall be explained in the owner/ operator native language to assure the owner/operator comprehends. It is the responsibility of the owner/operator to maintain the legibility of all warning and Instruction labels. The owner/operator shall retain this manual for future reference to important warnings, operating and maintenance instructions. INSTALLATION 1 2 Bolt stabilizer feet to the bottom of the stand with the 3/8-16 X 3/4" bolts. Bolt cabinet to stand with the 3/8-16 X 2-1/2" bolts, nuts and washers provided. Note: Make sure that the arrows are pointing toward the unit (see fig 1). 1 3 Filter/Regulator 3/8 NPT Air Inlet Oiler 4 Fill the oiler with 30W non-detergent oil before attaching airline. NEVER REMOVE OILER WITH AIR ATTACHED Route your airline safely to prevent tripping and possible tipping the machine over. Use an unrestricted airline (no quick connects) at 100-120 psi and 3/8" to 1/2" ID. Attach the 3/4" nipple to the bottom of the unit and select a waste oil container to put under the unit. Page 5 of 8 5 6 7 INSPECTION Prior to operation a visual Inspection shall be made. Any crusher that appears to be damaged in any way, is badly worn or operates abnormally shall be removed from use until repairs are made. If over pressurizing of the equipment is believed to have occurred, contact a factory authorized service center for inspection of the crusher. An annual inspection by a factory authorized service center is recommended. Verify the pressure gauge on the pressure regulator/filter reads between 100 and 120 p. s. i. NOTE: If the external air supply is less than 100 p. s. i. , the crusher will operate but the crushing performance is reduced. [. . . ] Check that the Air Line delivers 100-120 psi to the crusher Filter-Regulator. SAFETY OPERATIONS · · · · Do not crush aerosol cans, glass, or content filled metal containers. Operate only with slip-in tray in place. MAINTENANCE · · · · · Check oiler level weekly to keep adequate oil in the air cylinder. Turn the drain valve at the bottom of the filter/regulator counterclockwise once a week to release water filtered from the air system. [. . . ]