User manual HAUCK PHOENIX 2003

[. . . ] Please use only original hauck accessories and original hauck spare parts. Avoid extreme usage situations that restrict your control over the child and the stroller. Do not ride on any escalators or stairs, and be careful using in the elevator while your child is in the stroller. Only use the space allowed for loading and do not exceed the maximum permitted weight of 15kg. [. . . ] Please make sure that the child's hands are nowhere new the folding area, so as not to risk them from being crashed if you have to fold up, unfold, or otherwise change the stroller or parts of it. 2) Open the stroller until the locking latches on both sides have locked in place. Push both plastic brackets at the same time until they are locked onto the rear legs. Push the rear wheel with axle onto the rear brake housing until you hear a click sound when the metal clamp catches groove on the axle. To remove the rear wheel, release the lock on the rear axle & pull the wheel off (3c). 4a-4d) To assemble the front wheel, loose the brake course on the screw (4a). Put the front wheel in the mounting and make sure both securing plates are engaged in the hole above the axle. Now adjust the brake on the brake course in such a way that it has an effect on the front wheel when using the hand brake. Align 2 of the holes at the back of the fender with the crossbar (4c). ) The child should be harnessed in at all times and should never be left unattended. Attention: Avoid serious injury from failing and sliding out, always use seat belt & always use as instructed. OPTION FEATURES ­ SHOP N DRIVE TRAVEL SYSTEM: This stroller is able to adapt our Hauck Zero Plus® Infant Carseat as a Travel System. There is an adaptor clip on the each side of the stroller's folding plastic, pull both of them up. Push the Zero Plus® Infant Carseat down until you hear the clip sound on both left & right sides (figure C1, C2). Lift up carefully the carseat to check if the carseat is securely locked in place. To release the carseat, push up the left & right levers, which are located underneath the carseat, and the adaptors can be released. Then lift up the carseat carefully (figure D2), and close the adaptors back to the original housing (figure D3). Make sure that the frame is stable, the screws are tight, the latching devices are safely locked, the wheels are securely attached and the brakes are in working order. [. . . ] Make sure that the frame is stable, the screws are tight, the latching devices are safely locked, the wheels are securely attached and the brakes are in working order. Check the cover occasionally, making sure that the stitching is still firm, and inspect the quality of the plastic parts. Proceed in the same manner with components that are broken, torn, defect or wornout. cLEANING THE COVERS Remove the covers from the frame by loosening the loops , press studs or screws. [. . . ]