User manual HAUCK MANHATTAN SHOP N DRIVE

[. . . ] WARNING: overloading, incorrect folding and use of non-approved accessories may damage or break this pushchair. WARNING: It may be unsafe to use replacement parts other than those supplied or approved by the manufacturer or distributor. Warning: Check that the pram body or seat unit attachment devices are correctly engaged before use. Please use only original hauck accessories and original hauck spare parts. [. . . ] Avoid extreme usage situations that restrict your control over the child and the pushchair. Do not ride on any escalators or stairs, and be careful using in the elevator while your child is in the pushchair. Only use the space allowed for loading and do not exceed the maximum permitted weight of 15kg. Please make sure that the child's hands are nowhere near the folding area, so as not to risk them from being crashed if you have to fold up, unfold, or otherwise change the pushchair or parts of it. It is not allowed to step onto the footrest / leg rest to get into the pushchair. WARNING: The vertical sitting position is not suitable for babies younger than 6 months. WARNING: Before use, check that the mounted cot or the seat unit has latched in properly. 2) open the stroller until the locking latches on both sides have locked in place. Push both plastic brackets at the same time until they are locked onto the rear legs. Push the rear wheel with axle onto the rear brake housing until you hear a click sound when the metal clamp catches groove on the axle. Attention: Avoid serious injury from failing and sliding out, always use seat belt & always use as instructed. 14) there are 2 shoulder harness height available in the stroller, use the slot closest to child's shoulder height. OPtIoN FEAtURES ­ SHoP N DRIVE tRAVEL SYStEM: This stroller is able to adapt our Hauck Zero Plus® Infant Carseat as a Travel System. There is an adaptor clip on the each side of the stroller's folding plastic, pull both of them up. Push the Zero Plus® Infant Carseat down until you hear the clip sound on both left & right sides (figure C1, C2). Lift up carefully the carseat to check if the carseat is securely locked in place. To release the carseat, push up the left & right levers, which are located underneath the carseat, and the adaptors can be released. Then lift up the carseat carefully (figure D2), and close the adaptors back to the original housing (figure D3). uPkEEP AND MAINtENANCE In General Please check the pushchair functions on a regular basis. Make sure that the frame is stable, the screws are tight, the latching devices are safely locked, the wheels are securely attached and the brakes are in working order. [. . . ] Make sure that the frame is stable, the screws are tight, the latching devices are safely locked, the wheels are securely attached and the brakes are in working order. Check the cover occasionally, making sure that the stitching is still firm, and inspect the quality of the plastic parts. Proceed in the same manner with components that are broken, torn, defect or wornout. cleaning the covers Remove the covers from the frame by loosening the loops , press studs or screws. [. . . ]