User manual HAUCK LYON

[. . . ] Screws must not be loose, as children can become stuck on them or items of clothing (e. [. . . ] If your child is old enough to sit up, put the cot in the lowest position to ensure maximum security. The height of the mattress must be such that the height to be climbed over (surface of the mattress to top edge of the cot frame) is at least 500 mm in the lowest position of the cot base and at least 200 mm in the highest position. Before you assemble the cot check that you have all the parts listed below that should be included. List of parts: A B C D1 D2 E F G H I Top part of head/foot of the cot Bottom part of head/foot of the cot Slatted frame 0 Side panel 0 Side panel with three sliding bars Allen screw Gudgeon Metal pins 0 Caps 0 Allen key 0 2x 2x 1x 1x 1x 12 x 12 x 4x 8x 1x How to assemble the cot: Insert the metal pins (I) into the bottom part of the head/foot, then join the top part of the head/foot (A) to the bottom part of the head/foot (B). Insert the gudgeons (F) into the slatted frame (C) and screw the screws (E) on to the head/foot using the Allen key (I). Locate three sliding bars in the middle of side panel D2 (see marking). [. . . ] However, check the bed for worn-out parts from time to time and replace them immediately. [. . . ]